Table of Contents
Advertisement
2 Operation
2.3 Viewing images from a PC
㉗[SD Memory Cards]-[Rec. on SD]
This can only be set when [Save trigger] is set to [Manual save] on the [SD memory card] tabs.
You can manually save images to SD Memory Cards by clicking [Start]. To manually save
images on the SD Memory Card, refer to the following.
→2.5 Manually save images on the SD memory card
㉘[SD Memory Cards]-[Log/Play]
Clicking [Start] displays the log list and plays back the images stored on the SD Memory Card.
Please refer to the following for details of the log list and how to play back the image.
→2.7 Display the log list
㉙[Camera to be displayed]
Select the camera to be displayed in the main area.
• [Quad]: Displays images of cameras 1, 2, 3, and 4 in quadrants.
• [Triple]: Displays images of cameras 1, 2, and 3 in triplicate.
•1: Displays camera 1 images.
•2: Displays camera 2 images.
•3: Displays images of camera 3.
•4: Displays camera 4 images.
㉚[Select Streams]-[Layout] pull-down menu
This pull-down menu is displayed when [Camera to be displayed] is displayed in [Quad] [Triple]
or when [Multi-directional + PTZ] is selected in [Live view].
Select the display layout of the camera image to be displayed in the main area from the
following.
When [Camera to be displayed] [Quad] [Triple] is selected: [Quadruple]/ [360 deg.]/ [270
deg.]
When [View live image][Multi-directional + PTZ] is selected: [Up/Down]/[Left/Right]
[Note:]
・The names of [AUX], [Open], and [Close] can be changed.
→12.3 [Alarm] to change the aux name
[Note:]
・This item is not displayed when [Image capture mode] is in quad mode.
64
Advertisement
Table of Contents
