Review The Serial Port Message Log - Digi IX10 User Manual

Hide thumbs Also See for IX10:

Table of Contents

3. Type exit to exit the Admin CLI.

Depending on your device configuration, you may be presented with an Access selection

menu. Type quit to disconnect from the device.

Review the serial port message log

Serial port messages can be reviewed from the Serial Port Log page.

A serial port message log is created and saved when serial port logging has been enabled and

configured for one of the following serial port modes: Login,

You can view the log file from the Log column in the Serial Status page.

1. Log into the IX10 WebUI as a user with Admin access.

2. On the main menu, click Status

3. Under Connections, click Serial. The Serial Status page displays.

4. If a green Log button is displayed, the serial port mode selected for the port supports serial

port logging, and logging is enabled. Click the Log button to open the Serial Port Log page for

that port. The Serial port log window displays.

If the Log button is gray, the serial port mode selected for the port supports serial port

logging, but logging is not enabled. If there is no Log button, the serial port mode selected for

the port does not support serial port logging.

5. Review the messages in the window.

Click Refresh to refresh the log display.

Click Download to download the serial port log to your local device. The log file is

saved to the /opt/serial directory. Because this is being save to the device's memory,

you should use serial logging for diagnostic purposes, rather than having it permanently

Click Restart to clear and restart the serial port log.

Command line

1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX10

local command line as a user with full Admin access rights.

Depending on your device configuration, you may be presented with an Access selection

menu. Type admin to access the Admin CLI.

2. To show the serial port's contents and logging status:

IX10 User Guide

Review the serial port message log