Log Serial Port Messages - Digi IX10 User Manual

Serial port
2. Use the show serial
> show serial
Label
--------
Serial 1
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Log serial port messages

To display and configure the serial port log:

WebUI
1. Log into the IX10 WebUI as a user with Admin access.
2. On the main menu, click Status
3. Under Connections, click Serial.
4. Click Log.
The Serial port log window displays.
5. Click Start to start serial port logging.
6. Click Stop to stop serial port logging if it has been started.
7. Click Refresh to refresh the log display.
8. Click Download to download the serial port log.
9. (Optional) For Log size, configure the maximum allowed log size for the serial port log. The
default is 65536.
IX10 User Guide
command:
Port Enable Mode
----- ------ -----
port1 true login
Baudrate
--------
9600
Log serial port messages
121