Table 2.26 Displayed And Setting Items In The [Partition Home] Window - Fujitsu PRIMEQUEST 500A Series Installation Manual

CHAPTER 2 Setup
2 Select the partition to which you want to add a Home IOU, and click the [Home]
button.
The [Partition Home] window is displayed.

Table 2.26 Displayed and setting items in the [Partition Home] window

<Home IOU>
IOU
Status
3
Click the radio buttons of an IO Unit or IOX to be made home.
Note: For the SB to be defined as the home SB, always select the one having the
4
Click the [Apply] button.
The specified IO Unit or IOX is set respectively as partition home. "H" is
displayed in the corresponding IOU column in the [Partition Configuration]
window.
2-58
Figure 2.35 [Partition Home] window
Item
Displays the IO Units and IOX that contain BMMs and are
included in partitions.
Displays the status of the target BMM.
smallest number.
Description
C122-E001-10EN