Fujitsu PRIMEQUEST 500A Series Installation Manual page 212

CHAPTER 4 Work Required After Operating System Installation
ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
HWADDR=00:D0:B7:53:89:C3
ONBOOT=yes
BROADCAST=192.168.0.255
IPADDR=192.168.0.1
NETMASK=255.255.255.0
Then, restart the network service to activate the network interface.
Command syntax:
/sbin/service network restart
To make the management LAN NIC settings effective, PSA need to be restarted.
Command syntax:
/sbin/service y30FJSVpsa stop
/sbin/service y30FJSVpsa start
4-26 C122-E001-10EN