Fujitsu PRIMEQUEST 500A Series Installation Manual page 402

Appendix D Installation in the SAN Boot Environment
Check the VERSION information in this list
Shell> drivers -b
D
R
V VERSION
=== ======== = = = == === ============================ =================
00D 00000010 B - -
020 00000010 B - -
021 00000010 D - -
022 00031114 B X X
Press ENTER to continue, 'q' to exit: q
Shell>
Note:
4
List HBAs.
Enter "drvcfg -s X" (X is the driver identification number that was recorded in
step 3), and press the [Enter] key. The mounted FC cards are listed. An example
is shown below.
----------------------------------------------------------
001: LP10k
002: LP10k
Note: The physical slot positions can be determined according to the bus
• PRIMEQUEST 580A/540A/580/540/480/440
• PRIMEQUEST 520A/520/420
D-8
T D
Y C I
P F A
E G G #D #C
2 43 PCI Bus Driver
3 3 USB Bus Driver
1 - Usb Keyboard Driver
2 7 Emulex SCSI Pass Thru Driver
The information shown above, including identification numbers,
varies depending on the environment.
Emulex FC EFI-Bios Utility, Ver: 3.10a6
Emulex Adapters in this System: 001 thru 002
PCI-X
PCI-X
numbers displayed in the window and the PRIMEQUEST physical
position - bus number table. Make sure that they match.
For the PRIMEQUEST physical position - bus number table, see Chapter
4, "Physical Positions and Bus Numbers," in the PRIMEQUEST 500A/500/
400 Series Reference Manual: Tool/Operation Information (C122-
E074EN).
→ "PRIMEQUEST 580A/540A/580/540/480/440 PCI Slot Physical
Positions and Bus Numbers"
→ "PRIMEQUEST 520A/520/420 PCI Slot Physical Positions and Bus
Numbers"
DRIVER NAME
133MHz Bus#: 49 Dev#: 01 Func#: 00
100MHz Bus#: 4B Dev#: 02 Func#: 00
IMAGE NAME
PciBus
UsbBus
UsbKeyboard
Elxcli311a4
C122-E001-10EN