Partition Home] Window; Figure 1.59 [Partition Home] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (515 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
MMB Web-UI (Web User Interface) Operations
1.3 [Partition] Menu for PRIMEQUEST 2400E2/2800E2/2400E/2800E
[Message]
This section describes the messages to be displayed on this window.
Message Number
E_00022
E_00111
W_00505
For details on the messages displayed on the window, see
(CA92344-0540).
1.3.4.4 [Partition Home] window
If you select the partition using the radio button on the [Partition Configuration] window and click the [Home]
button, [Partition Home] window is displayed.
1.
Select the SB which is considered as the Home SB, by using the radio button.
When SB (Memory Scale-up Board is excluded) which is set as Home SB is not mounted, the
background color is displayed in gray.
You can switch from the selected radio button on a grayed row to a radio button on a row that is
not grayed. However, if the selection on the row displayed in gray is removed once, it is not
possible to select the original radio button again.
When the Home SB is not set, the SB (Memory Scale-up Board is excluded) which is initially
installed in the partition by default is considered as the Home SB. However, when the Home SB
is removed and degenerated, SB (Memory Scale-up Board is excluded) with smallest number is
the Home SB.
2.
Click the [Apply] button.
Confirmation dialogue box is displayed.
3.
Click the [OK] button when you want to continue the processing.
Click the [Cancel] button when you want to cancel the processing.
4.
Click the [Apply] or the [Cancel] button.
Return to [Partition Configuration] window.
When the [Apply] button is clicked and the power supply of the target partition is ON, change of
[Home] is not possible. A warning dialogue box is displayed.
The partition doesn't have a node.
Failed to remove the SB, IOU or Extended Partitioning from the partition.
Unable to set configuration because the power on/off is processing.
FIGURE 1.59 [Partition Home] window
173
Message
PRIMEQUEST 2000 Series Message Reference
CA92344-0539-04
Advertisement
Table of Contents
