Fujitsu PRIMEQUEST 500A Series Installation Manual page 350

CHAPTER 5 Security Setup
2 Enter an SNMP v3 user.
Up to 16 users can be registered.
Table 5.6 Displayed and setting items in the [SNMP v3 Configuration] window
Engine ID
User
User Name
Auth Type
authpassphrase
privpassphrase
3
Click the [Apply] button.
To reflect the selected user, temporarily stop the SNMP daemon and then restart it.
5-12
Item
Specify an engine ID.
Remarks: Any of the following characters can be used:
Specifies a user name. Selecting the check box of the target
user enables input of a user name.
Remarks: Any of the following characters can be used:
Select the authentication type.
• MD5: Use MD5 as the hash function for password
encryption.
• SHA: Use SHA as the hash function for password
encryption.
Displays the packet encryption keyword used for password
authentication (no encryption is performed).
Displays the packet encryption keyword used for password
authentication and encryption.
Description
[0-9],[a-z],[A-Z], (en-size space)
! " # $ % & ' ( ) = - ^ ~ \ @ ` [ ] { } : * ; + ? < . > , / _ |
However, the following restrictions apply:
•The following characters cannot be used at the
beginning of a string: # (en-size space)
•The following character cannot be used at the end of
the string:
(en-size space)
[0-9],[a-z],[A-Z], (en-size space)
! " # $ % & ' ( ) = - ^ ~ \ @ ` [ ] { } : * ; + ? < . > , / _ |
However, the following character cannot be used at
the beginning of the string:
" ' ` #
C122-E001-10EN