Fujitsu PRIMEQUEST 500A Series Installation Manual page 291

Item
Boot Watchdog
C122-E001-10EN
Watchdog Specify whether to enable Boot Watchdog
monitoring.
[Disable]: Do not monitor.
[Enable]: Monitor.
Note: When performing the following operations,
set Boot Watchdog to [Disable]:
•CD-ROM boot
•Startup in single user mode
•Backup
SystemcastWizard
TimeOut Specify the time-out value in seconds when
Software Watchdog monitoring is enabled.
Specification range: 60 - 6000 seconds
Note:
Determine the value based on the duration from
when the partition power is turned on and
[System Progress] in the [Power Control]
window of the MMB changes to [Boot] to
when it changes to [OS Running]. To prevent
incorrect detection, Fujitsu recommends setting
a sufficiently large value, larger than double the
above duration.
Also, take into account the time required for
storing dump information when an OS panic
occurs.
This option can be specified only when
[Watchdog] is [Enable]. The default is 0. Note
that timeout data cannot be specified with the
default.
4.8 PSA Monitoring Setup
Description
and restore
Default: [Disable]
using
4-105