Fujitsu PRIMEQUEST 500A Series Installation Manual page 256

CHAPTER 4 Work Required After Operating System Installation
1
Click [Control Panel]
[Device Manager].
2
Open [Network Adapter], and click [Inter(R) PRO/100 VE Network Connection]
to select it.
4-70
1Select [Start], and click [Run]. The [Run] dialog box opens.
2Enter "mstsc /v:<servername/ip address> /console" in the [Open]
input box, and click the [OK] button.
Note:Using the teaming function for the management LAN may
change the IP address of the management LAN because it is
identified as a new device. If the IP address of the
management LAN is changed, a connection established from
a remote desktop to the management LAN may be terminated.
In this event, establish a connection by using the KVM and specifying
the correct IP address.
For the connection to the server, specify an actual server name and
IP address in <servername/ip address>. (A virtual IP address in
the cluster cannot be specified.)
* For details on the options for mstsc, you can enter "mstsc /?".
→
[Administrative Tools]
Figure 4.15 [Computer Management] window
→
[Computer Management]
C122-E001-10EN
→