Fujitsu PRIMEQUEST 500A Series Installation Manual page 361

A.4 DSNAP
DSNAP is a software program that quickly and securely collects investigative data,
when a problem occurs in Windows OS. If a problem occurs in your system, your
Fujitsu certified engineer uses this software to correctly find out your system software
configuration and setting states and conduct smooth examinations of processes.
Installation method
See Section 3.3.6, "High-Reliability Tools."
Usage
Refer to [OS Install Drive]: \DSNAP README_EN.TXT file.
A.5 System Parameter Check Tool
Some settings of the system parameters, which are very likely to be changed in the
Linux kernel environment, may prevent normal operation of the Linux system.
System Parameter Check Tool detects and reports these settings. System Parameter
Check Tool supports the following Linux OS:
Red Hat Enterprise Linux AS (v.4 for Itanium)
Red Hat Enterprise Linux 5 (for Intel Itanium)
System Parameter Check Tool provides commands that check and set system
parameters and the function that implements automatic checks at system boot and
shutdown.
Using System Parameter Check Tool can prevent system boot failures, which might
be caused by system parameter setting errors, and it can detect dump area setting
errors.
For details, see the PRIMEQUEST System Parameter Check Tool User's Guide
(C122-E009EN).
C122-E001-10EN
A.4 DSNAP
A-5