Fujitsu PRIMEQUEST 500A Series Installation Manual page 109

2 Select the check box for the target partition in a column containing an SB that has
not been added to any partition (free SB or reserved SB).
3
[Replacement Condition] sets the condition that determines the timing at which
the reserved SB is to be switched.
(PRIMEQUEST 580A/540A/520A or PRIMEQUEST 500 series running MMB
firmware whose version level is 3.24 or later)
4
Click the [Apply] button.
Notes:
C122-E001-10EN
To change a reserved SB to a free SB, clear its check box in the [Reserved
SB Configuration] window.
2.5 Partition Initialization
2-63