Fujitsu PRIMEQUEST 500A Series Installation Manual page 187

CHAPTER 4 Work Required After Operating
1
4.1 Types of Tasks Required
This chapter describes the tasks that need to be performed after operating system
installation.
The table below indicates the tasks required after operating system installation is
complete.
Task
PSA installation
PSA monitoring setup Set up S.M.A.R.T.
Dump environment
setup
NTP client setup
OS backup
Settings saving
C122-E001-10EN
System Installation
Table 4.1 Tasks required
Description
Install the PSA.
Set up Watchdog.
Set up a dump
environment.
Set up NTP clients.
Specify Linux OS backup
settings.
Specify Windows OS
backup settings.
Save PSA settings and EFI
configuration information.
OS installed
Linux PRIMEQUEST 580A/
(Red Hat) 540A/580/540/480/440
PRIMEQUEST 520A/
520/420
Linux(SUSE) PRIMEQUEST 500A/
500/400 series common
Windows PRIMEQUEST 580A/
540A/580/540/480/440
PRIMEQUEST 520A/
520/420
Linux or PRIMEQUEST 500A/
Windows 500/400 series common
Linux PRIMEQUEST 500A/
(Red Hat only) 500/400 series common
Windows PRIMEQUEST 500A/
500/400 series common
Linux or PRIMEQUEST 500A/
Windows 500/400 series common
Linux PRIMEQUEST 500A/
(Red Hat only) 500/400 series common
Windows PRIMEQUEST 500A/
500/400 series common
Linux or PRIMEQUEST 500A/
Windows 500/400 series common
Model Section
4.2
4.3
4.4
4.5
4.6
4.8
4.9
4.10
4.12
4.12.1
4.12.2
4.13
4-1