Table 2.1 System Status Display - Fujitsu PRIMEQUEST 500A Series Installation Manual

[Part Number]
Displays the PRIMEQUEST part number (Product Info Product Part/Model
Number of operation panel FRU).
Note: When "Read Error" is displayed, contact your Fujitsu certified service
[Serial Number]
Displays the serial number of the PRIMEQUEST.
Note: When "Read Error" is displayed, contact your Fujitsu certified service
[Status]
Displays the status of the entire PRIMEQUEST. The system status display
indicates the three statuses below. Click one of the three to display the [System
Event Log] window.
Normal
Warning
Error
c) Active MMB display
Displays the number of the MMB that is operating as an active MMB with the Web-
UI connected.
d) Maintenance status display
When a certified service engineer is maintaining this device by using a maintenance
wizard menu, "Under Maintenance" is displayed in orange. When maintenance is not
being conducted, no information is displayed.
e) Navigation bar
The top layer menus are displayed. A menu being selected is displayed in black
characters, and one not selected is displayed in white characters.
[System], [Partition], [Switch], [User Administration], [Network Configuration],
[Maintenance]
Click one of the menus to display the sub-menu in g).
C122-E001-10EN
engineer.
engineer.

Table 2.1 System status display

Status Display color
Green
Yellow
Red
2.2 MMB Connection and Setup
Icon
None
Black ! in yellow
triangle
White x in red circle
2-11