Be sure to keep this manual in a safe and convenient location for quick reference. Fujitsu makes every effort to prevent users and bystanders from being injured and to prevent property damage. Be sure to use the product according to the instructions in the manual.
Page 4
CHAPTER 8 Powering On and Off a Partition Chapter 7 describes partition power control. APPENDIX A Lists of Settings (Links) Appendix A provides links to Appendix A List of Settings in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). APPENDIX B Manual PSA Installation and Uninstallation Appendix B describes how to manually install and uninstall PSA for a specific operating system.
Page 5
The index lists keywords and the pages that they refer to, helping readers quickly find the necessary information in the manual. Manuals for the PRIMEQUEST 1000 series The following manuals have been prepared to provide you with the information necessary to use the PRIMEQUEST 1000 series.
Page 6
Related manuals The following manuals relate to the PRIMEQUEST 1000 series. You can access these manuals at the following site: http://jp.fujitsu.com/platform/server/primequest/manual-e/ Contact your sales representative for inquiries about the ServerView manuals.
Page 7
PRIMEQUEST 1000 Series Installation Manual Preface Title Description Manual code ServerView Suite Describes RAID management using ServerView None ServerView RAID RAID Manager. Management User Manual ServerView Suite Describes the basic concepts of ServerView None Basic Concepts Suite. ServerView Operations Describes installation and update installation of...
Page 8
PRIMEQUEST 1000 Series Installation Manual Preface Title Description Manual code Refer to the manual from the SVS-DVD2 supplied with the product or from the following URL: The Fujitsu Technology Solutions manuals server http://manuals.ts.fujitsu.com/ Abbreviations This manual uses the following product name abbreviations.
Page 9
PRIMEQUEST 1000 Series Installation Manual Preface Formal product name Abbreviation VMware vSphere(R) 4 VMware, vSphere 4.x, VMware 4.x VMware vSphere(R) 5 VMware, vSphere 5.x, VMware 5.x VMware(R) ESX(R) 4 ESX, ESX 4.x VMware(R) ESXi(TM) 5 ESXi, ESXi 5.x Novell(R) SUSE(R) LINUX Enterprise Server 11 Service Pack 2...
Similarly, one space line is inserted before and after the alert statement. Only Fujitsu certified service engineers should perform the following tasks on this product and the options provided by Fujitsu. Customers must not perform these tasks under any circumstances. Otherwise, electric shock, injury, or fire may result.
Page 11
PRIMEQUEST 1000 Series Installation Manual Preface - Linux is a registered trademark of Linus Torvalds. - Red Hat, the Shadowman logo and JBoss are registered trademarks of Red Hat, Inc. in the U.S. and other countries. - Intel and Xeon are trademarks or registered trademarks of Intel Corporation.
Page 12
PRIMEQUEST 1000 Series Installation Manual Preface Work Warning Location category Normal The unit may be damaged or operating abnormally. 2.1 Safety operation - Follow the precautions, warnings, and instructions shown on the Precautions main unit. - Do not block the vent holes.
PRIMEQUEST 1000 Series Installation Manual Preface Work Warning Location category Normal (Damage to data) 3.2.1 Powering operation Confirm that the System Power LED of the DVDB is off before turning off on and off the the main power (e.g., UPS, power distribution box). If you turn off the main main unit power (e.g., UPS, power distribution box) while the System Power LED...
Page 15
Notes on Handling the Product Adding optional products For stable operation of the PRIMEQUEST 1000 series server, use only a Fujitsu certified optional product as an added option. Note that the PRIMEQUEST 1000 series server is not guaranteed to operate with any optional product not certified by Fujitsu.
Product and service inquiries For all product use and technical inquiries, contact the distributor where you purchased your product, or a Fujitsu sales representative or systems engineer (SE). If you do not know the appropriate contact address for inquiries about the PRIMEQUEST 1000 series, use the Fujitsu contact line.
Page 17
PRIMEQUEST 1000 Series Installation Manual Preface Edition Date Revised location (type) (*) Description Incorporated differences in Errata and 2010-08-20 All pages Addenda (C122-E119-02EN to C122- E119-10EN) - Added items about 1800E2 - Incorporated differences in Errata and Addenda (C122- E119-11EN to C122-...
Page 18
However, a number marked with an asterisk (*) denotes a chapter, section, or item in a previous edition of the document. This manual shall not be reproduced or copied without the permission of Fujitsu Limited. Copyright 2010 - 2012 FUJITSU LIMITED...
PRIMEQUEST 1000 Series Installation Manual Contents Contents CHAPTER 1 Installation Overview ........................1 1.1 Setup Workflow ............................2 1.1.1 Work performed by a field engineer ....................2 1.1.2 Work performed by the user ........................ 2 CHAPTER 2 Preparing for Main Unit Installation ....................
Page 20
PRIMEQUEST 1000 Series Installation Manual Contents 4.2.4 Configuring bundled software after the completion of installation ............. 64 4.2.5 Connecting the SAN and built-in HDD after the installation .............. 66 4.3 RHEL Installation Procedures on the Built-in HDD .................. 67 4.3.1 Advance setup ...........................
Page 21
PRIMEQUEST 1000 Series Installation Manual Contents 4.11.1 Advance setup ..........................110 4.11.2 Preparing for Installation ....................... 110 4.11.3 Installing the operating system ..................... 110 4.11.4 Configuring bundled software after the completion of installation ..........113 4.11.5 Connecting the SAN and built-in HDD after the installation ............
Page 22
CHAPTER 7 Work after Installation ....................... 205 7.1 Duplicate Network Adapter Configuration ..................... 206 7.2 Configuring NTP ........................... 207 7.2.1 How NTP operates in the PRIMEQUEST 1000 series ..............207 7.2.2 Setting an NTP server ........................208 7.3 Configuring a DNS Server ........................211 7.4 Configuring SMTP...
Page 23
PRIMEQUEST 1000 Series Installation Manual Contents APPENDIX C Software (Links) ........................257 C.1 General Description and Types of Bundled Software ................258 APPENDIX D Configuring the SAN Boot Environment .................. 259 APPENDIX E Notes on VMware Installation ....................260 E.1 Building a RAID Environment Using VMware 4.x Built-in Disks ............
Page 26
PRIMEQUEST 1000 Series Installation Manual Figures FIGURE E.4 [Software Watchdog] window ....................264 FIGURE E.5 Network configuration immediately after installation of OS ............271 FIGURE E.6 Network configuration after setup ..................... 276 FIGURE E.7 VMware vSphere 4.x Client ...................... 277 FIGURE E.8 [DNS and Routing Configuration] dialog box...
Page 27
PRIMEQUEST 1000 Series Installation Manual Tables Tables TABLE 1.1 Work performed by the user ......................2 TABLE 2.1 Accessories required in main unit installation ................11 TABLE 3.1 MMB connection and configuration flow ..................20 TABLE 3.2 External interfaces of the MMB .....................
Page 28
PRIMEQUEST 1000 Series Installation Manual Tables TABLE B.4 Settings automatically added/changed during PSA installation ..........237 TABLE E.1 Settings after PSA Installation (VMware 4.x) ................270 TABLE E.2 IP addresses to be set for virtual ports ..................275 TABLE E.3 Configuring the firewall for PSA operation ..................
This chapter describes the workflow up to actual operation of the PRIMEQUEST 1000 series server. For an overview of the hardware and software and the part names and functions of the server, see the PRIMEQUEST 1000 Series General Description (C122-B022EN). 1.1 Setup Workflow...
CHAPTER 1 Installation Overview Setup Workflow This section describes the workflow for the tasks required to prepare the PRIMEQUEST 1000 series server for operation. Setup work consists of tasks performed by a field engineer and other tasks performed by the user.
Page 31
PRIMEQUEST 1000 Series Installation Manual CHAPTER 1 Installation Overview Work item Work tasks and description - Initializing MMB settings 3.3.10 Registering a user Set the parameters for the entire MMB, such as account the user account names or system names.
CHAPTER 2 Preparing for Main Unit Installation This chapter describes the preparation before main unit installation. This preparation includes work up to power cable connection. 2.1 Safety Precautions ............6 2.2 Before Installing the Main Unit ........7 2.3 Checking Environmental Conditions ......
PRIMEQUEST 1000 Series Installation Manual CHAPTER 2 Preparing for Main Unit Installation Safety Precautions Observe the following precautions when installing the main unit. Failure to do so cause damage to the unit or abnormal operation. - Follow the precautions, warnings, and instructions shown on the main unit.
Be sure that you understand the system configuration and have acquired all the requisite installation information before installing the main unit. For a system overview and details on the system configuration, see the PRIMEQUEST 1000 Series General Description (C122-B022EN). For details on the installation prerequisites, see the PRIMEQUEST 1000 Series Hardware Installation Manual (C122-H004EN).
The conditions of the main unit operating environment depend on the altitude at the installation site. For details on the environmental conditions of the PRIMEQUEST 1000 series, see 1.3 Installation Specifications in the PRIMEQUEST 1000 Series Hardware Installation Manual (C122-H004EN).
2.2.2 Basic interfaces and peripheral devices (PRIMEQUEST 1800E) in the PRIMEQUEST 1000 Series Hardware Installation Manual (C122-H004EN). For details on the connectors and their shapes, see 2.4.1 PRIMEQUEST 1000 series main unit in the PRIMEQUEST 1000 Series Hardware Installation Manual (C122-H004EN).
Before installing the main unit, confirm that the installation site has enough space for the required service (maintenance) area and for accommodating the peripheral devices. For details on checks of the installation site, see Chapter 1 Installation Information in the PRIMEQUEST 1000 Series Hardware Installation Manual (C122- H004EN).
Ethernet Category 5 cable or better representative. Console PC-to-LAN cable (for user LAN) External switching hub Used to connect the PRIMEQUEST 1000 series server to an external switching hub via a LAN. Multitester Used to check the input AC voltage. C122-E107-09EN...
PRIMEQUEST 1000 Series Installation Manual CHAPTER 2 Preparing for Main Unit Installation Confirming the Supplied Parts Confirm that the supplied parts match the shipping list provided with the main unit. If any of the parts listed in the shipping list or performance records are missing, incorrect, or damaged, contact the distributor where you purchased your product, or your sales representative.
CHAPTER 2 Preparing for Main Unit Installation Mounting the Main Unit in a 19-inch Rack The PRIMEQUEST 1000 series server is mounted for use in a 19-inch rack. For details on mounting, see Appendix A Racks in the PRIMEQUEST 1000 Series Hardware Installation Manual (C122-H004EN).
Operations 1. Confirm with an on-site electrical engineer that the input power satisfies power requirements. For details on the power requirements, see 1.3 Installation Specifications in the PRIMEQUEST 1000 Series Hardware Installation Manual (C122-H004EN). 2. Confirm that the power cables are connected to the AC inlets of the main unit and PCI_Box. Also confirm that the power cables are secured with the AC cord clamps for the AC inlets on the main unit.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 2 Preparing for Main Unit Installation FIGURE 2.1 Power cable socket locations (PRIMEQUEST 1800E2/1800E) FIGURE 2.2 Power cable socket locations (PCI_Box) C122-E107-09EN...
Page 44
PRIMEQUEST 1000 Series Installation Manual CHAPTER 2 Preparing for Main Unit Installation C122-E107-09EN...
Work before Operating System Installation This chapter describes the work that must be done before you install an operating system on the PRIMEQUEST 1000 series server. The chapter also describes the settings required for practical operation and the necessary setup work.
- IP address of the PC used as the MMB console (referred to below as the MMB console PC) - User accounts - Name of the PRIMEQUEST 1000 series system (also used as the SNMP system name) - Management LAN environment ... etc.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 3 Work before Operating System Installation Starting the System This section describes power control for system startup. Use the following power-on procedure only when the power to the main unit is off. 3.2.1 Powering on and off the main unit This section describes how to power on and power off the main unit.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 3 Work before Operating System Installation Connecting and Configuring the MMB A field engineer will have constructed a test environment for the MMB to run test programs in it. Therefore, you need to reconfigure the MMB to switch from the test environment to that for actual operation. Skip the steps for items already set by the field engineer.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 3 Work before Operating System Installation All screenshots are display examples, and the actually displayed contents vary depending on the system configuration and other factors. 3.3.1 Connecting the MMB console PC This section describes how to connect the MMB console PC.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 3 Work before Operating System Installation Setting item Value Data bit Parity None Stop bit Flow control None Emulation VT100 3.3.2 Initializing MMB settings The procedure for initializing MMB settings is as follows. If the field engineer has already made the settings, you can skip the following procedure.
Connecting the PRIMEQUEST 1000 series server to an external LAN The following describes the configuration of external LAN connections of the PRIMEQUEST 1000 series server. It also describes points to consider about the connections. We recommend you configure security before connecting an external LAN.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 3 Work before Operating System Installation FIGURE 3.3 Network configuration and IP addresses of the management LAN Connect the management (USER) ports of MMB#0 and MMB#1 to an external switching hub with LAN cables.
- Do not attempt multiple logins (e.g., multiple logins with the same user name) from one MMB console PC through the Web-UI to the PRIMEQUEST 1000 series system. Multiple logins may cause the following problems, depending on the browser type or version. In a tabbed browser, avoid using multiple tabs for one login session, which would be the same as multiple logins.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 3 Work before Operating System Installation Enable JavaScript and enable Download in your browser settings. 2. Enter the following URL. TABLE 3.5 URL to enter for login Standard http://nodename:adminport http://nodename:adminport/login.cgi (Windows Server 2008 and Windows...
If the Web-UI window displays "Read Error," check for details on the error in 11.2 Troubleshooting in the PRIMEQUEST 1000 Series Administration Manual (C122-E108EN). If you cannot solve the problem even after referring to the manual, contact your sales representative or a field engineer.
Serial Number This field displays the serial number of the PRIMEQUEST 1000 series server. Status This field displays the status of the entire PRIMEQUEST 1000 series system. The following table shows the three system status indicators. TABLE 3.7 System status indicators...
PRIMEQUEST 1000 Series Installation Manual CHAPTER 3 Work before Operating System Installation The selected menu is displayed in black characters. The menus not selected are displayed in white characters. Logout Click here to log out from the Web-UI. Submenu breadcrumb trail This bar displays each level on the path to the menu that is displayed in the submenu area.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 3 Work before Operating System Installation - Placing the cursor on a submenu highlights the submenu. - The selected submenu has a different background color. - The background colors of menus at different levels depend on the level.
Input fields, radio buttons, and check boxes are grayed out and unavailable if authenticated users do not have corresponding privileges. For details on the privileges, see TABLE 1.1 User privileges in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). Button area This area displays buttons for setting the contents of the status display and settings area.
Remarks Once the virtual IP address is set: Web browsers have access through the virtual IP address of the PRIMEQUEST 1000 series server. They cannot access the MMB Web-UI through the specified physical IP address of MMB#0 or MMB#1. The maintenance terminal and REMCS has access through the address specified in [Maintenance IP Address]. You can specify the address by selecting [Network Configuration] - [Network Interface].
1. Click [Network Configuration] - [Network Interface]. >> The [Network Interface] window appears. For details on the [Network Interface] window, see 1.5.2 [Network Interface] window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). FIGURE 3.9 [Network Interface] window (example) 2. Enter values in [IP Address], [Subnet Mask], and [Gateway Address] in [Virtual IP Address]. Also specify the host name.
1. Click [Network Configuration] - [Network Protocols]. >> The [Network Protocols] window appears. For details on the [Network Protocols] window, see 1.5.4 [Network Protocols] window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). FIGURE 3.10 [Network Protocols] window (example) 2. Specify each item in [Telnet].
CHAPTER 3 Work before Operating System Installation >> The [Network Interface] window appears. For details on the [Network Interface] window, see 1.5.2 [Network Interface] window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). FIGURE 3.11 [Network Interface] window (example) 2. Click [Enable] for [DNS] in [DNS(optional)]. Then, enter a value for each item.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 3 Work before Operating System Installation FIGURE 3.12 [Alarm E-Mail] window (example) 2. Enter values in the required fields. Remarks - As described below, the [From] address is sent with Alarm E-Mail notification to the SMTP server: - If the [Use envelope "from"...
CHAPTER 3 Work before Operating System Installation >> The [Alarm E-Mail Filtering Condition] window appears. For details on the [Alarm E-Mail Filtering Condition] window, see [Alarm E-Mail Filtering Condition] window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). FIGURE 3.13 [Alarm E-Mail Filtering Condition] window (example) 2.
2. Click the [Add User] button. >> The [Add User] window appears. For details on the [Add User] window, see the part about the [Add User] window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). FIGURE 3.15 [Add User] window (example)
4. Click the [Apply] button. 3.3.11 Setting the system name Specify a name for the PRIMEQUEST 1000 series system. This name is also used as the SNMP system name. For details on how to back up the specified information, see 3.5 Saving Configuration Information.
NTP server as reference. For stable NTP operation, specify multiple NTP servers (at least three servers in RHEL) from each NTP client. Operations in the [Date/Time] window 1. Click [Network Configuration] - [Date/Time]. >> The [Date/Time] window appears. For details on the [Date/Time] window, see 1.5.1 [Date/Time] window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). C122-E107-09EN...
PRIMEQUEST 1000 Series Installation Manual CHAPTER 3 Work before Operating System Installation FIGURE 3.18 [Date/Time] window (example) 2. Enter values in the required fields. 3. Click the [Apply] button. Operations in the [Management LAN Port Configuration] window 1. Click [Network Configuration] - [Management LAN Port Configuration].
PRIMEQUEST 1000 Series Installation Manual CHAPTER 3 Work before Operating System Installation FIGURE 3.19 [Management LAN Port Configuration] window (example) 2. Enter values in the required fields. 3. Click the [Apply] button. C122-E107-09EN...
Operations 1. Click [Partition] - [Partition Configuration]. >> The [Partition Configuration] window appears. For details on the [Partition Configuration] window, see 1.3.4 [Partition Configuration] window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). FIGURE 3.20 [Partition Configuration] window (example) Remarks The above window shows the maximum configuration.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 3 Work before Operating System Installation Partition] window in 1.3.4 [Partition Configuration] window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). FIGURE 3.21 [Add SB/IOB/GSPB to Partition] window (example) 4. Click the radio button of an SB, IOB, or GSPB to add it to the partition.
GSPBs. These SBs IOBs, and GSPBs are incorporated in the partition selected in step 2. For details on the [Remove SB/IOB/GSPB from Partition] window, see [Remove SB/IOB/GSPB from Partition] window in 1.3.4 [Partition Configuration] window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). C122-E107-09EN...
You can use the USB port and VGA port as external connectors of the Home SB. If you want to change the Home SB, specify the change with the Web-UI. For details on the Home SB, see 5.2.4 Home SB in the PRIMEQUEST 1000 Series General Description (C122-B022EN). Remarks Windows license verification may be required depending on the combination of the SB and enable kit.
CHAPTER 3 Work before Operating System Installation >> The [Partition Home] window appears. For details on the [Partition Home] window, see [Partition Home] window in 1.3.4 [Partition Configuration] window in the PRIMEQUEST 1000 Series Tool Reference (C122- E110EN). FIGURE 3.24 [Partition Home] window (example) 2.
- Free SBs - SBs incorporated in other partitions - SBs defined as the Reserved SBs of other partitions For details on the Reserved SB, see 3.2.1 Reserved SB in the PRIMEQUEST 1000 Series Administration Manual (C122-E108EN). Remarks Windows license verification may be required depending on the combination of the SB and enable kit. For details, see "License authentication with SB and enable kit combinations"...
Page 77
However, the following workaround can suppress the restart request. Workaround for the Windows restart You can suppress the restart request only if the PRIMEQUEST 1000 series server has already set as the Reserved Repeat the following procedure for all the partitions with Windows Server OS installed.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 3 Work before Operating System Installation 5. Log in with Administrator privilege. After the message that the system must be restarted is displayed on the screen, follow the instructions to restart the system. 6. After the Windows restart is completed, shut down the system.
If the specified name is the same as the specified host name of the operating system, the partition is easy to recognize. Operations 1. Click [Partition] - [Partition Configuration]. >> The [Partition Configuration] window appears. For details on the [Partition Configuration] window, see 1.3.4 [Partition Configuration] window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). C122-E107-09EN...
Set Mirror mode, Hyper Threading mode, and other modes for the partition. The MMB Web-UI and UEFI (Unified Extensible Firmware Interface) windows have settings items for these settings. The following table lists the setting items and the screen transitions. For details on each setting, see the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN).
Page 81
FC card to be used for the installation. - Confirm that the Boot device to be used in the relevant partition has been recognized by the UEFI. For details on this confirmation, see 5.4 [Boot Manager] Menu in the PRIMEQUEST 1000 Series Tool Reference (C122- C122-E107-09EN...
Operations 1. Click [Partition] - [Partition#x] - [Mode]. >> The [Mode] window appears. For details on the [Mode] window, see [Mode] window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). FIGURE 3.29 [Mode] window (example) Remarks The window displays the [PSA] menu only in the PRIMEQUEST 1800E.
Checking partition information Check partition information by displaying the partition status and partition-related information. You can also check the partition configuration of the entire PRIMEQUEST 1000 series system in the [Partition Configuration] window. Operations 1. Click [Partition] - [Partition#x] - [Information].
This section describes how to back up MMB configuration information. Remarks For details on how to restore MMB configuration information, see 8.1.2 Backing up and restoring MMB configuration information in the PRIMEQUEST 1000 Series Administration Manual (C122-E108EN). Operations 1. Click [Maintenance] - [Backup/Restore Configuration] - [Backup/Restore MMB Configuration].
Page 86
PRIMEQUEST 1000 Series Installation Manual CHAPTER 3 Work before Operating System Installation >> The save destination dialog box of the browser appears. 3. Select the save destination path. Then, click the [OK] button. >> Download of the configuration information file begins.
CHAPTER 4 Installing the Operating System and Bundled Software This appendix describes the procedures for installing RHEL, Windows, and VMware on the SAN storage unit or built-in HDD. For details on the installation procedures, see the respective references. 4.1 Installation Procedure for the Operating System and Bundled Software ..........
For details, see G.1 CPU in the PRIMEQUEST 1000 Series Administration Manual (C122- E108EN). Use SVIM to install the operating system on a partition of the PRIMEQUEST 1000 series server. SVIM is a setup support tool for the following operations:...
For details on I/O space assignment, see 3.4.5 Setting various modes in this manual and 5.5.1 [Configure I/ O Space Assignment] menu in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). 4.2.2 Preparing for Installation No RHEL distribution DVD is available for RHEL installation. Users who have purchased a RHEL subscription will need to create a RHEL distribution DVD.
Operations 1. Make the setting for booting the partition from remote storage. For details on the setting, see 1.6.3 Remote operation (BMC) in the PRIMEQUEST 1000 Series Administration Manual (C122-E108EN). 2. Insert ServerView Suite DVD1 into the DVD drive. Then, power on the partition.
- UEFI: Embedded DVD/CD: Specify this item when using the built-in DVD drive for installation in UEFI mode. - UEFI Shell: Specify this menu when starting UEFI Shell. The PRIMEQUEST 1000 series does not use UEFI Shell. - Legacy Boot: Specify this item for BIOS mode.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 4 Installing the Operating System and Bundled Software Remark The IP address of the LAN cannot be set through the operating system setup. Set the IP address after the installation of the operating system.
Page 93
The downloaded binary file has a description about the PRIMERGY, but the driver and utility can be used for the PRIMEQUEST 1000 series. 3. Copy the downloaded file to an arbitrary directory of the PRIMEQUEST 1000 series, and then expand # tar xvzf F1010350.tar.gz 4.
4.2.5 Connecting the SAN and built-in HDD after the installation For details on connecting the SAN and built-in HDD after the installation, see the PRIMEQUEST 1000 Series SAN Boot Environment Configuration Manual (C122-E155EN). Also, for details ondriver parameters, see the readme file that comes with the driver.
For details on I/O space assignment, see 3.4.5 Setting various modes in this manual and 5.5.1 [Configure I/ O Space Assignment] menu in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). 4.3.2 Preparing for Installation No RHEL distribution DVD is available for RHEL installation. Users who have purchased a RHEL subscription will need to create a RHEL distribution DVD.
2. Mount the disk image of the RHEL distribution DVD on remote storage. 3. Change the boot order to give the highest priority to booting the storage unit where the operating system is installed. For details, see 1.3.1 [Power Control] window in the PRIMEQUEST 1000 Series Tool Reference (C122- E110EN). 4.3.3 Installing the operating system This section describes the operating system installation with SVIM.
- UEFI: Embedded DVD/CD: Specify this item when using the built-in DVD drive for installation in UEFI mode. - UEFI Shell: Specify this menu when starting UEFI Shell. The PRIMEQUEST 1000 series does not use UEFI Shell. - Legacy Boot: Specify this item for BIOS mode.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 4 Installing the Operating System and Bundled Software Remark The IP address of the LAN cannot be set through the operating system setup. Set the IP address after the installation of the operating system.
Page 99
The downloaded binary file has a description about the PRIMERGY, but the driver and utility can be used for the PRIMEQUEST 1000 series. 3. Copy the downloaded file to an arbitrary directory of the PRIMEQUEST 1000 series, and then expand # tar xvzf F1010350.tar.gz 4.
4.3.5 Connecting the SAN and built-in HDD after the installation For connecting the SAN and built-in HDD after the installation, see the PRIMEQUEST 1000 Series SAN Boot Environment Configuration Manual (C122-E155EN). Also, for details on driver parameters, see the readme file that comes with the driver.
SAS controller (GSPB), SAS disk unit controller and SAS array disk unit controller. For details on I/O space assignment, see 3.4.5 Setting various modes in this manual and 5.5.1 [Configure I/ O Space Assignment] menu in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). 4.4.2 Preparing for Installation Prepare the following.
Operations 1. Make the setting for booting the partition from remote storage. For details on the setting, see 1.6.3 Remote operation (BMC) in the PRIMEQUEST 1000 Series Administration Manual (C122-E108EN). 2. Insert ServerView Suite DVD1 into the DVD drive. Then, power on the partition.
- UEFI: Embedded DVD/CD: Specify this item when using the built-in DVD drive for installation in UEFI mode. - UEFI Shell: Specify this menu when starting UEFI Shell. The PRIMEQUEST 1000 series does not use UEFI Shell. - Legacy Boot: Specify this item for BIOS mode.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 4 Installing the Operating System and Bundled Software 8. Replace the media with the operating system installation media according to the SVIM instructions. 9. Perform the following operation by using the MMB Web-UI. Remarks These steps are not required in Windows Server 2012.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 4 Installing the Operating System and Bundled Software FIGURE 4.5 [Install Windows] window 2. When the [Install Windows] window appears after a system reboot following termination of the [Installing updates] window with the [Install Windows] window displayed as is in 1. above.
Note The downloaded binary file has a description about the PRIMERGY, but the driver and utility can be used for the PRIMEQUEST 1000 series. 2. Execute the downloaded file by double-clicking it. The prompt screen for the cmd.exe (a window with a black background) is displayed for a while, and then the file is extracted.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 4 Installing the Operating System and Bundled Software 2. Double-click the file in the <DVD drive name>:\HotFixes\SR-IO folder to run it. - If the folder contains the following two files, select a file according to the Windows type.
Page 108
12. Configure the dump area. Confirm that the hard disk has enough free space before collecting a memory dump. For details, see 11.4.4 Setting up the dump environment (Windows) in the PRIMEQUEST 1000 Series Administration Manual (C122-E108EN). 13. Configure the NTP client.
4.4.5 Connecting the SAN and built-in HDD after the installation For details on connecting the SAN and built-in HDD after the installation, see the PRIMEQUEST 1000 Series SAN Boot Environment Configuration Manual (C122-E155EN). 1. Change and check the setting of detailed FC card information. For details, see the PRIMEQUEST 1000 Series SAN Boot Environment Configuration Manual (C122-E155EN).
This section concisely describes the procedures for installing Windows on the built-in HDD. Confirm the MMB configuration and successful login to the MMB before starting the installation.For details on configuring the SAN storage unit and FC card (Fibre Channel card), see the PRIMEQUEST 1000 Series SAN Boot Environment Configuration Manual (C122-E155EN).
Operations 1. Make the setting for booting the partition from remote storage. For details on the setting, see 1.6.3 Remote operation (BMC) in the PRIMEQUEST 1000 Series Administration Manual (C122-E108EN). 2. Insert ServerView Suite DVD1 into the DVD drive. Then, power on the partition.
- UEFI: Embedded DVD/CD: Specify this item when using the built-in DVD drive for installation in UEFI mode. - UEFI Shell: Specify this menu when starting UEFI Shell. The PRIMEQUEST 1000 series does not use UEFI Shell. - Legacy Boot: Specify this item for BIOS mode.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 4 Installing the Operating System and Bundled Software 8. Replace the media with the operating system installation media according to the SVIM instructions. 9. Perform the following operation by using the MMB Web-UI. Remarks These steps are not required in Windows Server 2012.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 4 Installing the Operating System and Bundled Software FIGURE 4.9 [Install Windows] window 2. When the [Install Windows] window appears after a system reboot following termination of the [Installing updates] window with the [Install Windows] window displayed as is in 1. above.
Note The downloaded binary file has a description about the PRIMERGY, but the driver and utility can be used for the PRIMEQUEST 1000 series. 2. Execute the downloaded file by double-clicking it. The prompt screen for the cmd.exe (a window with a black background) is displayed for a while, and then the file is extracted.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 4 Installing the Operating System and Bundled Software - If the folder contains the following two files, select a file according to the Windows type. TABLE 4.7 If the folder contains two files OS type...
Page 117
12. Configure the dump area. Confirm that the hard disk has enough free space before collecting a memory dump. For details, see 11.4.4 Setting up the dump environment (Windows) in the PRIMEQUEST 1000 Series Administration Manual (C122-E108EN). 13. Configure the NTP client.
4.5.5 Connecting the SAN and built-in HDD after the installation For details on connecting the SAN and built-in HDD after the installation, see the PRIMEQUEST 1000 Series SAN Boot Environment Configuration Manual (C122-E155EN). 1. Change and check the setting of detailed FC card information. For details, see the PRIMEQUEST 1000 Series SAN Boot Environment Configuration Manual (C122-E155EN).
SAS controller (GSPB), SAS disk unit controller and SAS array disk unit controller. For details on I/O space assignment, see 3.4.5 Setting various modes and 5.5.1 [Configure I/O Space Assignment] menu in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). 4.6.2 Preparing for Installation To prepare for installation, also see the VMware information.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 4 Installing the Operating System and Bundled Software 2. Change FC cabling to single path (connecting only one FC cable). 4.6.3 Installing VMware 4.x Install VMware 4.x by following the instructions in the VMware vSphere Software Handbook.
- Enter a value between 1 and 100 minutes for [Timeout]. 6. Enter your user name and password, and press the [Enter] key. 4.6.7 Completing VMware 4.x installation After completing the settings, reboot the partition of the PRIMEQUEST 1000 series server. C122-E107-09EN...
MegaRAID (R) SAS Software contained on the SVS DVD. 5. Change the boot order to give the highest priority in startup to DVD boot. For details, see 1.3.1 [Power Control] window in the PRIMEQUEST 1000 Series Tool Reference (C122- E110EN).
PRIMEQUEST 1000 Series Installation Manual CHAPTER 4 Installing the Operating System and Bundled Software 4.7.3 Installing VMware 4.x Install VMware 4.x by following the instructions in the VMware vSphere Software Handbook. For details on this handbook, contract your sales representative.
- Enter a value between 1 and 100 minutes for [Timeout]. 6. Enter your user name and password, and press the [Enter] key. 4.7.7 Completing VMware installation After completing the settings, reboot the partition of the PRIMEQUEST 1000 series server. C122-E107-09EN...
SAS controller (GSPB), SAS disk unit controller and SAS array disk unit controller. For details on I/O space assignment, see 3.4.5 Setting various modes in this manual and 5.5.1 [Configure I/ O Space Assignment] menu in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). 4.8.2 Preparing for Installation To prepare for installation, also see the VMware information.
Operations 1. Make the setting for booting the partition from remote storage. For details on the setting, see 1.6.3 Remote operation (BMC) in the PRIMEQUEST 1000 Series Administration Manual (C122-E108EN). 2. Insert ServerView Suite DVD1 into the DVD drive. Then, power on the partition.
- UEFI: Embedded DVD/CD: Specify this item when using the built-in DVD drive for installation in UEFI mode. - UEFI Shell: Specify this menu when starting UEFI Shell. The PRIMEQUEST 1000 series does not use UEFI Shell. - Legacy Boot: Specify this item for BIOS mode.
- Enter a value between 1 and 100 minutes for [Timeout]. 6. Enter your user name and password, and press the [Enter] key. 4.8.5 Completing VMware 5.x installation After completing the settings, reboot the partition of the PRIMEQUEST 1000 series server. 4.8.6 Installing bundled software For bundled software installation, see E.7 Installing VMware 5.x Bundled...
MegaRAID (R) SAS Software contained on the SVS DVD. 5. Change the boot order to give the highest priority in startup to DVD boot. For details, see 1.3.1 [Power Control] window in the PRIMEQUEST 1000 Series Tool Reference (C122- E110EN).
Operations 1. Make the setting for booting the partition from remote storage. For details on the setting, see 1.6.3 Remote operation (BMC) in the PRIMEQUEST 1000 Series Administration Manual (C122-E108EN). 2. Insert ServerView Suite DVD1 into the DVD drive. Then, power on the partition.
- UEFI: Embedded DVD/CD: Specify this item when using the built-in DVD drive for installation in UEFI mode. - UEFI Shell: Specify this menu when starting UEFI Shell. The PRIMEQUEST 1000 series does not use UEFI Shell. - Legacy Boot: Specify this item for BIOS mode.
- Enter a value between 1 and 100 minutes for [Timeout]. 6. Enter your user name and password, and press the [Enter] key. 4.9.5 Completing VMware 5.x installation After completing the settings, reboot the partition of the PRIMEQUEST 1000 series server. 4.9.6 Installing bundled software For bundled software installation, see E.7 Installing VMware 5.x Bundled...
SAS controller (GSPB), SAS disk unit controller and SAS array disk unit controller. For details on I/O space assignment, see 3.4.5 Setting various modes in this manual and 5.5.1 [Configure I/ O Space Assignment] menu in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). 4.10.2 Preparing for Installation Prepare a SLES11 SP2 installation DVD.
Operations 1. Make the setting for booting the partition from remote storage. For details on the setting, see 1.6.3 Remote operation (BMC) in the PRIMEQUEST 1000 Series Administration Manual (C122-E108EN). 2. Insert ServerView Suite DVD1 into the DVD drive. Then, power on the partition.
- UEFI: Embedded DVD/CD: Specify this item when using the built-in DVD drive for installation in UEFI mode. - UEFI Shell: Specify this menu when starting UEFI Shell. The PRIMEQUEST 1000 series does not use UEFI Shell. - Legacy Boot: Specify this item for BIOS mode.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 4 Installing the Operating System and Bundled Software Remark The IP address of the LAN cannot be set through the operating system setup. Set the IP address after the installation of the operating system.
Connecting the SAN and built-in HDD after the installation For details on connecting the SAN and built-in HDD after the installation, see the PRIMEQUEST 1000 Series SAN Boot Environment Configuration Manual (C122-E155EN). Also, for details on driver parameters, see the readme file that comes with the driver.
SAS array disk unit controller. For details on I/O space assignment, see 3.4.5 Setting various modes in this manual and 5.5.1 [Configure I/ O Space Assignment] menu in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). 4.11.2 Preparing for Installation Prepare the SLES11 SP2 installation DVD.
Page 139
Operations 1. Make the setting for booting the partitionfrom remote storage. For details on the setting, see 1.6.3 Remote operation (BMC) in the PRIMEQUEST 1000 Series Administration Manual (C122-E108EN). 2. Insert ServerView Suite DVD1 into the DVD drive. Then, power on the partition.
- UEFI: Embedded DVD/CD: Specify this item when using the built-in DVD drive for installation in UEFI mode. - UEFI Shell: Specify this menu when starting UEFI Shell. The PRIMEQUEST 1000 series does not use UEFI Shell. - Legacy Boot: Specify this item for BIOS mode.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 4 Installing the Operating System and Bundled Software Remark The IP address of the LAN cannot be set through the operating system setup. Set the IP address after the installation of the operating system.
Connecting the SAN and built-in HDD after the installation For connecting the SAN and built-in HDD after the installation, see the PRIMEQUEST 1000 Series SAN Boot Environment Configuration Manual (C122-E155EN). Also, for details on driver parameters, see the readme file that comes with the driver.
CHAPTER 5 Work after Operating System Installation (PRIMEQUEST 1800E2) This chapter describes how to make settings after operating system installation on the PRIMEQUEST 1800E2. 5.1 Types of Work ............116 5.2 Configuring SVS (SVagent/SVmco) ......117 5.3 Setting Up the Dump Environment (Windows) ..
PRIMEQUEST 1000 Series Installation Manual CHAPTER 5 Work after Operating System Installation (PRIMEQUEST 1800E2) Types of Work TABLE 5.1 Types of work lists the types and details of the work performed after operating system installation. TABLE 5.1 Types of work...
PRIMEQUEST 1000 Series Installation Manual CHAPTER 5 Work after Operating System Installation (PRIMEQUEST 1800E2) Configuring SVS (SVagent/SVmco) After installing the operating system, you need to configure SVS (SVagent/SVmco) for operation. For details on SVagent/SVmco settings, see the SVmco manual. - SVagent:...
For details on how to set up the dump environment, see 11.4.4 Setting up the dump environment (Windows) in the PRIMEQUEST 1000 Series Administration Manual (C122-E108EN). 5.3.1 Memory dump files and paging files A memory dump file stores debug information on any STOP error (fatal system error) that has occurred in the system.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 5 Work after Operating System Installation (PRIMEQUEST 1800E2) Setting Up the Dump Environment (Linux) In RHEL, you can prepare an environment to enable secure acquisition of dumps by using the standard operating system function kdump.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 5 Work after Operating System Installation (PRIMEQUEST 1800E2) Configuring the NTP Client For details on how to configure the NTP client, see 7.2 Configuring NTP. C122-E107-09EN...
PRIMEQUEST 1000 Series Installation Manual CHAPTER 5 Work after Operating System Installation (PRIMEQUEST 1800E2) Saving Management and Configuration Information This section describes how to save the following information. Be sure to save UEFI configuration information. 5.6.1 Saving MMB configuration information 5.6.2 Saving BIOS configuration information...
PRIMEQUEST 1000 Series Installation Manual CHAPTER 5 Work after Operating System Installation (PRIMEQUEST 1800E2) The backup file of the MMB configuration information has the following default name: MMB_backup date_MMB version.dat 5.6.2 Saving BIOS configuration information This section describes how to back up BIOS configuration information to a remote PC.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 5 Work after Operating System Installation (PRIMEQUEST 1800E2) Configuring Service Life Monitoring by RAS Support Service For the use of RAID cards and UPSs, configure the BBU (Battery Backup Unit) service life monitoring by RAS Support Service.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 5 Work after Operating System Installation (PRIMEQUEST 1800E2) - After moving a monitored RAID card to another partition through a partition configuration change, you need to correct the RAS Support Service settings. First, in the Mounting Dates list, clear the RAID card mounting date on the original source partition.
Page 153
PRIMEQUEST 1000 Series Installation Manual CHAPTER 5 Work after Operating System Installation (PRIMEQUEST 1800E2) TABLE 5.3 Message for advance notification of replacement and replacement notification message (UPS) Start time for sending messages for advance Time for sending replacement notification of replacement...
Page 154
PRIMEQUEST 1000 Series Installation Manual CHAPTER 5 Work after Operating System Installation (PRIMEQUEST 1800E2) C122-E107-09EN...
CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) This chapter describes how to make PSA and other settings after operating system installation on the PRIMEQUEST 1800E. 6.1 Types of Work ............128 6.2 Configuring PSA (Linux: Red Hat Enterprise Linux) ..
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) Types of Work TABLE 6.1 Types of work lists the types and details of the work performed after operating system installation. TABLE 6.1 Types of work...
*2 Manual setting: Values are not automatically set during PSA installation. Make settings as described in the section referred to in the table. *3 To operate the PRIMEQUEST 1000 series server, you need to first install PSA. Otherwise, the following restrictions apply.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) - Operations management software cannot collect information on the partition side. - Even under an REMCS agreement, no software errors are reported. - Hot maintenance of hard disks is disabled. The partition must be stopped for maintenance.
Page 159
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) The PSA-to-MMB communication LAN is usually set with the following values during PSA installation. <IP address> 172.30.0.<partition ID + 2>/24 Example: Partition ID of 2 172.30.0.4/24 <Communication settings>...
Page 160
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) eth0, eth1, and lo shown on the left side are the interface names. /sbin/ifconfig -a eth0 Link encap:Ethernet HWaddr 00:D0:B7:53:89:C3 inet addr:10.24.17.149 Bcast:10.24.17.255 Mask:255.255.255.0 inet6 addr:...
Page 161
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) bus-info: 0000:00:19.0 (Corresponds to NIC of PSA-to-MMB communication LAN) Configuring the NIC of the PSA-to-MMB communication LAN Configure the NIC of the PSA-to-MMB communication LAN by using the following procedure.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) 6.2.2 Confirming management LAN settings Make network settings for the management LAN. If necessary, also configure any duplication with bonding or PRIMECLUSTER GLS, for example. After completing the above network settings for the management LAN, perform the operations described in 6.2.4...
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) 6.2.4 Checking the firewall function (opening ports) Open any partition port that is required for operating PSA but is not open because of firewall settings. Configure the management LAN interfaces and PSA-to-MMB communication LAN interfaces.
Page 164
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) The following is a sample configuration file. /opt/FJSVpsa/sh/sample_conf_setmlanfw.txt Remarks A PSA update will overwrite the above sample file. Save a copy of the configuration file to retain the original values.
Page 165
After changing the IP address of the management LAN interface, delete the settings once, and set their values again. For details on how to delete the settings, see (7) Configuration deletion procedure in 4.11 Firewall Setting Command for the Management LAN Interface (setmlanfw.sh) in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN).
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) Port Port number Description Remarks Example of a case where port 5000 need not be set: iptables -A OUTPUT -m state --state NEW,ESTABLISH -j ACCEPT iptables -A INPUT -m state --state...
Page 169
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) Example of input [PSATRAP] PSATRAP_SET=1 2. Set trap destinations in the snmpd.conf file. For details, see Editing snmpd.conf. 3. Restart PSA to apply the settings. Syntax...
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) The following example shows how to send traps with "public" as the community name. The traps are sent to the manager of port 162 with IP address 192.168.0.162.
Page 171
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) -A authPassword: This is the authentication password (at least eight characters). This setting must match that on the manager side. The option takes effect only if the security level in the -l option includes authentication. Otherwise, you can omit the option.
Setting the management LAN IP address Set the partition management LAN IP address in PSA. For details on the management LAN, see 1.3 Management LAN in the PRIMEQUEST 1000 Series Administration Manual (C122-E108EN). Note Here, set the IP address on the partition instead of the IP address on the MMB.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) [NETWORK] ManagementIP=192.168.0.1 Restart PSA to reflect the new NIC setting for the management LAN. Syntax /sbin/service y30FJSVpsa stop /sbin/service y10FJSVpsa start /sbin/service y30FJSVpsa start For details on how to specify any duplication of the management LAN with PRIMECLUSTER GLS, see the applicable PRIMECLUSTER manuals.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) /var/net-snmp/snmpd.conf oldEngineID 0x19760523 6. Execute the service command to start snmpd. Syntax /sbin/service snmpd start 7. Move to the /opt/FJSVpsa/sh/ directory to generate another SNMPv3 password for internal PSA communication.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) /sbin/service y30FJSVpsa start 6.2.10 Uninstalling PSA This section describes how to uninstall PSA in Red Hat Enterprise Linux. Execute the following commands in the order shown to first stop PSA services and then uninstall the PSA package.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) Configuring PSA (Windows Server 2003) This section describes confirmation of the required settings for PSA operation after operating system installation, and corresponding features about the settings.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) - SVIM installs PSA as it installs the operating system. For details on SVIM, see the ServerView Installation Manager. - For details on how to manually install PSA, see...
CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) - Execute the SNMP security setting command (setsnmpsec) in the following situations. For details on the command, see 4.8 SNMP Security Setting Command (setsnmpsec) in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN).
Page 180
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) [PSA installation folder]\opt\FJSVpsa\sh\setpsalan.bat Note If the operating system has not been restarted after PSA installation, the PSA-to-MMB communication LAN setting command in step 1 will fail.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) 2. Select [PSANIF] from the displayed list. Then, select [Properties] from the right-click menu. Notes - If there is no connection named [PSANIF], PSA has probably not been installed. Always change the settings after PSA installation.
Page 182
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) - Make settings only as needed. Operations management software needs these settings to manage events by partition. - Even if this setting is skipped, traps are sent via the MMB.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) 12. Click [Action] - [Restart] to restart SNMP Service. Restarting PSA 1. Click [Start menu] - [Administrative Tools] - [Services]. 2. Select [PRIMEQUEST Server Agent] in the right side of the window.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) FIGURE 6.2 [Add a Port] dialog box (SNMP) 5. Enter the port number used by SNMP. Then, click the [OK] button. 6. Click the [OK] button in the [Windows Firewall] window.
Setting the management LAN IP address Set the partition management LAN IP address in PSA. For details on the management LAN, see 1.3 Management LAN in the PRIMEQUEST 1000 Series Administration Manual (C122-E108EN). Note Here, set the IP address on the partition instead of the IP address on the MMB.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) 2. Start the saved fix program. The following window appears for installation preparations. FIGURE 6.3 Preparing to Install window 3. The following window appears when installation preparations are completed. Click the [Next] button to proceed.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) FIGURE 6.4 Update installation window 4. Click the [Finish] button. C122-E107-09EN...
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) FIGURE 6.5 Update installation complete window 5. You may need to restart your computer. If so, a confirmation dialog box appears. The dialog box asks whether you want to restart the computer immediately.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) 3. Click the [OK] button. >> Uninstallation begins. Immediately after uninstallation is completed, the maintenance complete window appears. 4. Click the [Finish] button. FIGURE 6.7 Uninstall Complete window 5.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) Configuring PSA (Windows Server 2008) This section describes confirmation of the required settings for PSA operation after operating system installation, and corresponding features about the settings.
- The installer installs some components for REMCS function on the operating system side during PSA installation. Only Fujitsu certified service engineers make settings for REMCS. The following table lists settings for PSA operation. The installer automatically adds or updates these settings during PSA installation.
Remarks - Execute the SNMP security setting command (setsnmpsec) in the following situations. For details on the command, see 4.8 SNMP Security Setting Command (setsnmpsec) in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). - Having installed PSA, you will be changing the SNMP Service security setting from [Accept SNMP packets from any host] to [Accept SNMP packets from these hosts].
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) 6.4.3 Installing the PSHED Plugin driver The PSHED Plugin driver expands the WHEA (Windows Hardware Error Architecture) functions. This driver is not automatically installed. Manually install the driver with the batch file (plugin_install.bat) stored in the following folder.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) 3. Confirm that [PRIMEQUEST PSHED Plugin Driver] appears under [System Devices] in the Device Manager. If the Device Manager does not display the driver, repeat the procedure from step 1.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) 7. Click [Add] in [Trap Send Destination]. Enter the host name or IP address of the server receiving the trap (i.e., the trap destination). Then, click [Add].
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) - SNMP Service uses UDP port 161 (to receive data from the MMB). - fjpsawg.exe uses TCP port 24450 (to receive data from the MMB). - fjpsammbs.exe uses a port to send data to the MMB (TCP port 5000 on the MMB side).
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) FIGURE 6.9 [General] tab in [SNMP Service (UDP In) Properties] 5. Click the [Scope] tab. Select [Any IP address] for [Local IP Address]. Select [These IP Addresses] in [Remote IP Address]. Then, click the [Add] button.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) FIGURE 6.10 [Scope] tab in [SNMP Service (UDP In) Properties] 6. The [IP Address] dialog box appears. Click [Predefined set of computers]. Select [Local subnet] from the list. Then, click the [OK] button.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) FIGURE 6.11 [IP Address] dialog box 7. Click the [OK] button to close the [SNMP Service (UDP In) Properties] dialog box. 8. Click [New Rule] in the right pane of the [Windows Firewall with Advanced Security] window. The [New Inbound Rule Wizard] window appears with [Rule Type] displayed at the top left.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) FIGURE 6.12 New Inbound Rule Wizard - Rule Type 9. The wizard displays the [Program] window, as indicated at the upper left. Select [This program path]. Then, click the [Browse] button.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) FIGURE 6.13 New Inbound Rule Wizard - Program 10. The wizard displays the [Protocol and Ports] window, as indicated at the upper left. Select or enter values for the following items.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) FIGURE 6.14 New Inbound Rule Wizard - Protocol and Ports 11. The wizard displays the [Scope] window, as indicated at the upper left. Select or enter values for the following items.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) FIGURE 6.15 New Inbound Rule Wizard - Scope 12. The wizard displays the [Action] window, as indicated at the upper left. Select [Allow the connection]. Then, click the [Next] button.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) FIGURE 6.16 New Inbound Rule Wizard - Action 13. The wizard displays the [Profile] window, as indicated at the upper left. Check all the [Domain], [Private], and [Public] check boxes.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) FIGURE 6.17 New Inbound Rule Wizard - Profile 14. The wizard displays the [Name] window, as indicated at the upper left. Enter "PSAWG" in [Name]. Then, click the [Finish] button.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) FIGURE 6.18 New Inbound Rule Wizard - Name 15. Click [Outbound Rules] in the left pane of the [Windows Firewall with Advanced Security] window. The [Outbound Rules] list appears in the center pane.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) TABLE 6.13 [Protocol and Ports] setting items Window item Selected or entered value Protocol type Local port All Ports Remote port Select [Specific Ports]. Then, enter 5000 in the text box below it.
Page 209
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) Window item Selected or entered value Enter the IP address of the PSA-to-MMB communication LAN on the MMB side. 20. The wizard displays the [Action] window, as indicated at the upper left. Select [Allow the connection]. Then, click the [Next] button.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) FIGURE 6.20 New Outbound Rule Wizard - Protocol and Ports 26. The wizard displays the [Scope] window, as indicated at the upper left. Select or enter values for the following items.
Setting the management LAN IP address Set the partition management LAN IP address in PSA. For details on the management LAN, see 1.3 Management LAN in the PRIMEQUEST 1000 Series Administration Manual (C122-E108EN). Note Here, set the IP address on the partition instead of the IP address on the MMB.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) [NETWORK] ManagementIP=192.168.0.1 Restart PSA to reflect the new NIC settings for the management LAN. Restarting PSA 1. Click [Start] - [Administrative Tools] - [Services]. 2. Select [PRIMEQUEST Server Agent] in the right side of the window.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) FIGURE 6.21 Preparing to Install window 3. The following window appears when installation preparations are completed. Click the [Next] button to proceed. >> The program update begins.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) After completing PSA installation including an update to the PSHED Plugin driver, be sure to confirm that the operating system can be restarted before you restart the operating system.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) FIGURE 6.24 Program removal window 6.4.10 Uninstalling PSA This section describes the PSA uninstallation procedure. Remarks Uninstalling PSA deletes all the files in the PSA installation folder. Save the necessary files before uninstallation.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) FIGURE 6.25 [Program and Features] window 2. Select [PRIMEQUEST Server Agent] from the list of currently installed programs. Then, click [Remove]. The Preparing to Install window appears. Then, a deletion confirmation message appears.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) FIGURE 6.26 Preparing to Install window 3. Click the [Yes] button. >> Uninstallation begins. FIGURE 6.27 Confirmation message dialog box Immediately after uninstallation is completed, the Uninstall Complete window appears.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) FIGURE 6.28 Uninstall Complete window 4. Click the [Finish] button. 5. To delete the PSHED Plugin driver, you need to restart the operating system. Be sure to confirm that the operating system can be restarted, before restarting it.
For details on how to set up the dump environment, see 11.4.4 Setting up the dump environment (Windows) in the PRIMEQUEST 1000 Series Administration Manual (C122-E108EN). 6.5.1 Memory dump files and paging files A memory dump file stores debug information on any STOP error (fatal system error) that has occurred in the system.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) Setting Up the Dump Environment (Linux) In RHEL, you can prepare an environment to enable secure acquisition of dumps by using the standard operating system function kdump.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) Configuring the NTP Client For details on how to configure the NTP client, see 7.2 Configuring NTP. C122-E107-09EN...
- Deleting an exported file from the partition management area Operations 1. Select [Partition] - [Partition#x] - [PSA] - [Export List]. >> The [Export List] window appears. For details on the [Export List] window, see 3.11 [Export List] Window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). C122-E107-09EN...
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) FIGURE 6.29 [Export List] window (example) 2. Click the button appropriate to your operation. - Saving a snapshot to a file in CSV format: Click the [Export] button.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) You can use the following characters in a keyword: Single-byte alphanumeric characters Single-byte space Single-byte symbols (except < > % & " , \ ) FIGURE 6.30 [Export] window (example) 2.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) FIGURE 6.31 [Backup/Restore MMB Configuration] window (example) 2. Click the [Backup] button. >> The save destination dialog box of the browser appears. 3. Select the save destination path. Then, click the [OK] button.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) FIGURE 6.32 [Backup BIOS Configuration] window (example) 2. Select the radio button of the partition to which to back up the configuration information. Then, click the [Backup] button.
In the Mounting Dates list, enter the mounting dates of the RAID cards for which to set service life monitoring. Notes Note the following points about BBU service life monitoring for a RAID card in the PRIMEQUEST 1000 series server.
FIGURE 6.34 RAS Support Service screens (move to another partition) - The PRIMEQUEST 1000 series server can have multiple partition configurations. For example, suppose a partition requires many CPUs during the day and a lot of I/O at night, the partition configuration must change between day and night.
Since you can enter a value in the Mounting Dates list, enter the battery unit mounting date in the list. Notes Note the following points about battery unit service life monitoring for a UPS in the PRIMEQUEST 1000 series server.
## Setup for FJSVpsa Please do not remove the following lines ## #sv#com2sec psalocal localhost psaprivate <- #sv#group PsaRWGroup v1 psalocal <- #sv#view fujitsu included .1.3.6.1.4.1.211.1.31.1 ff.c0 <- #sv#access PsaRWGroup "" any noauth exact fujitsu fujitsu none <- rouser fjsvpsa master agentx agentxTimeout 360 agentxRetries 0 sysobjectid .1.3.6.1.4.1.211.1.31.1.2.100.2.0...
Page 231
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) 3. To reflect the setting, restart PSA. /sbin/service y30FJSVpsa stop /sbin/service y30FJSVpsa start C122-E107-09EN...
Page 232
PRIMEQUEST 1000 Series Installation Manual CHAPTER 6 Work after Operating System Installation (PRIMEQUEST 1800E) C122-E107-09EN...
CHAPTER 7 Work after Installation This chapter describes the work performed after PRIMEQUEST 1000 series installation. This work includes configuring NTP and security. 7.1 Duplicate Network Adapter Configuration ....206 7.2 Configuring NTP ............207 7.3 Configuring a DNS Server ........
Disabled on the standby side FIGURE 7.1 External network configuration Note There are some precautions on teaming with Intel PROSet(R). For details on the precautions, see APPENDIX G. 8 NIC (Network Interface Card) in the PRIMEQUEST 1000 Series Administration Manual (C122-E108EN). C122-E107-09EN...
How NTP operates in the PRIMEQUEST 1000 series This section describes how NTP is used to correct the time of each partition in the PRIMEQUEST 1000 series. The time is set at the following two types of units in the PRIMEQUEST 1000 series server:...
PRIMEQUEST 1000 Series Installation Manual CHAPTER 7 Work after Installation FIGURE 7.2 Operation with external NTP servers (three NTP servers) Only a single NTP server can be specified for a client. In this case, if the NTP client is no longer able to communicate with the specified server, NTP server communication is lost because no other synchronized server is available.
Operations 1. Click [Network Configuration] - [Date/Time]. The [Date/Time] window appears. For details on the [Date/Time] window, see 1.5.1 [Date/Time] window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). FIGURE 7.3 [Date/Time] window (example) 2. Click [Enable] for [NTP]. 3. Enter the IP address of another NTP server.
Page 238
PRIMEQUEST 1000 Series Installation Manual CHAPTER 7 Work after Installation 5. After several minutes elapse, click the [Refresh] button. Then, confirm that the window displays the correct time. C122-E107-09EN...
PRIMEQUEST 1000 Series Installation Manual CHAPTER 7 Work after Installation Configuring a DNS Server For details on how to configure a DNS server, see 3.3.8 Configuring a DNS server. C122-E107-09EN...
PRIMEQUEST 1000 Series Installation Manual CHAPTER 7 Work after Installation Configuring SMTP For details on how to configure SMTP, see 3.3.9 Configuring Alarm E-Mail. C122-E107-09EN...
Selecting the filter to edit Operations 1. Click [Network Configuration] - [Access Control]. The [Access Control] window appears. For details on the [Access Control] window, see 1.5.10 [Access Control] window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). C122-E107-09EN...
Depending on whether you are adding or editing the filter, the [Add Filter] window or [Edit Filter] window appears. For details on the [Add Filter] and [Edit Filter] windows, see [Add Filter]/[Edit Filter] window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). C122-E107-09EN...
PRIMEQUEST 1000 Series Installation Manual CHAPTER 7 Work after Installation FIGURE 7.5 [Add Filter] window (example) 2. Enter values in the required fields. You can set up to 64 filters. Remarks Specify the IP address while taking account of the proxy setting for the Web browser on the PC or workstation.
1. Click [Network Configuration] - [Network Protocols]. The [Network Protocols] window appears. For details on the [Network Protocols] window, see 1.5.4 [Network Protocols] window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). FIGURE 7.6 [Network Protocols] window (example) 2. Enter values for each item in [SNMP].
CHAPTER 7 Work after Installation The [SNMP Community] window appears. For details on the [SNMP Community] window, see [SNMP Community] window in 1.5.6 [SNMP Configuration] menu in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). FIGURE 7.7 [SNMP Community] window (example) 2.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 7 Work after Installation FIGURE 7.8 [SNMP Trap] window (example) 2. Enter destinations. You can set up to 16 trap destinations. Set the community or user name, IP address of the trap destination, SNMP version, and authentication level.
1. Click [Network Configuration] - [SNMP Configuration] - [SNMP v3 Configuration]. The [SNMP v3 Configuration] window appears. For details on the [SNMP v3 Configuration] window, see [SNMP v3 Configuration] window in 1.5.6 [SNMP Configuration] menu in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN).
Specify a "verified certificate" as the valid SSL certificate. Alternatively, specify a "self-signed certificate" created in the MMB window. A Fujitsu certified service engineer may have already configured HTTPS. If no change is needed, proceed to the next setting item.
PRIMEQUEST 1000 Series Installation Manual CHAPTER 7 Work after Installation FIGURE 7.11 [Network Protocols] window (example) 2. Specify each HTTPS-related item in [HTTP]. 3. Click the [Apply] button. C122-E107-09EN...
PRIMEQUEST 1000 Series Installation Manual CHAPTER 7 Work after Installation Scheduled Operations For details on scheduled operations, see 9.3 Scheduled Operations in the PRIMEQUEST 1000 Series Administration Manual (C122-E108EN). C122-E107-09EN...
2. Click [Partition] - [Power Control]. The [Power Control] window appears. For details on the [Power Control] window, see 1.3.1 [Power Control] window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). FIGURE 8.1 [Power Control] window (example) 3. Select [Power On] in [Power Control] for the partition that you are going to power on. Then, click the [Apply] button.
If the following problems occur, check for details on the problem in 11.2.11 Problems with partition operations in the PRIMEQUEST 1000 Series Administration Manual (C122-E108EN). - The MMB Web-UI displays [Error] for [Status] (information area) because either of the following was...
PRIMEQUEST 1000 Series Installation Manual CHAPTER 8 Powering On and Off a Partition FIGURE 8.2 [Power Control] window (example) 3. Select [Power Off] in [Power Control] for the partition that you are going to power off. Then, click the [Apply] button.
APPENDIX A Lists of Settings (Links) See Appendix A Lists of Settings in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). A.1 MMB Settings ............228 A.2 PSA Settings ............229 A.3 UEFI Settings ............230 A.4 BMC Settings ............231...
PRIMEQUEST 1000 Series Installation Manual APPENDIX A Lists of Settings (Links) MMB Settings See A.1 MMB Web-UI Settings in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). C122-E107-09EN...
PRIMEQUEST 1000 Series Installation Manual APPENDIX A Lists of Settings (Links) PSA Settings See A.2 PSA Settings in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). C122-E107-09EN...
PRIMEQUEST 1000 Series Installation Manual APPENDIX A Lists of Settings (Links) UEFI Settings See A.3 UEFI Settings in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). C122-E107-09EN...
PRIMEQUEST 1000 Series Installation Manual APPENDIX A Lists of Settings (Links) BMC Settings See A.4 BMC Settings in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). C122-E107-09EN...
Page 260
PRIMEQUEST 1000 Series Installation Manual APPENDIX A Lists of Settings (Links) C122-E107-09EN...
APPENDIX B Manual PSA Installation and Uninstallation This appendix describes how to manually install and uninstall PSA for a specific operating system. If you use SVIM to install the operating system, you need not manually install PSA. Remarks PSA is provided only with the PRIMEQUEST 1800E. B.1 Manually Installing PSA (Linux: Red Hat Enterprise Linux) ................
PRIMEQUEST 1000 Series Installation Manual APPENDIX B Manual PSA Installation and Uninstallation Manually Installing PSA (Linux: Red Hat Enterprise Linux) This section describes how to manually install PSA in Linux (Red Hat Enterprise Linux). Remarks Be sure to install PSA for PRIMEQUEST 1800E. Otherwise, the following restrictions apply.
PRIMEQUEST 1000 Series Installation Manual APPENDIX B Manual PSA Installation and Uninstallation TABLE B.3 Packages required for SIRMS operation (RHEL6) Package CPU architecture Linux package Not required libstdc++-4.4.4-13.el6.i686 or later Note The name of the FJSVfefpcl-related package depends on the operating system version.
PRIMEQUEST 1000 Series Installation Manual APPENDIX B Manual PSA Installation and Uninstallation - To use a firewall tool other than iptables: Stop the iptables service. B.1.3 Installing PSA Execute the following command to install the PSA package. The following explanation is based on the assumption that the PSA package (FJSVpsa-$VER-$REL.tar.gz) has...
PRIMEQUEST 1000 Series Installation Manual APPENDIX B Manual PSA Installation and Uninstallation Target Action Remarks SELinux setting The policy module is added for RHEL6 or later only. setting B.1.5 Restarting the partition After installing PSA, restart the partition with a reboot.
Page 267
PRIMEQUEST 1000 Series Installation Manual APPENDIX B Manual PSA Installation and Uninstallation If PSA version 2.8.0 or earlier is installed when the iptables service has stopped, the existing settings are cleared. Deal with this problem in the following way. - To use the iptables service: After making the settings to open the ports necessary for the system, open the necessary ports.
Page 268
PRIMEQUEST 1000 Series Installation Manual APPENDIX B Manual PSA Installation and Uninstallation ACCEPT 0.0.0.0/0 0.0.0.0/0 tcp dpt:5000 1. Confirm that the PSA-MMB_LAN chain has been created. # /sbin/iptables -L # iptables -L Execution result Chain INPUT (policy ACCEPT) target prot...
Page 269
PRIMEQUEST 1000 Series Installation Manual APPENDIX B Manual PSA Installation and Uninstallation ACCEPT 0.0.0.0/0 0.0.0.0/0 tcp spt:5000 ACCEPT 0.0.0.0/0 0.0.0.0/0 tcp dpt:5000 2. Add the jump setting for the PSA-MMB_LAN chain to INPUT and OUTPUT chains. Make the setting such that there are no interruptions by an existing REJECT setting in an INPUT or OUTPUT chain or by a user definition chain.
For details on the command, see 4.8 SNMP Security Setting Command (setsnmpsec) in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). - You will be changing the SNMP Service security setting from [Accept SNMP packets from any host] to [Accept SNMP packets from these hosts].
PRIMEQUEST 1000 Series Installation Manual APPENDIX B Manual PSA Installation and Uninstallation - If the set value of the following registry key is less than 20000 (20 seconds), the system may hang during operating system shutdown. Be sure to set a value equal to or greater than 20000 (20 seconds). The default is 20000.
PRIMEQUEST 1000 Series Installation Manual APPENDIX B Manual PSA Installation and Uninstallation B.2.3 Installing PSA Install the PSA package. Prepare the ServerView Suite DVD supplied with the main unit. Operations 1. Execute Tools\General\PSA\fjpsaxxxx.exe (xxxx: Version number). The following window appears for installation preparations.
FIGURE B.2 Setup window 3. Specify the installation destination. Then, click the [Next] button. The default installation path for PSA is Program Files\Fujitsu or Program Files(x86)\Fujitsu. To change the installation destination, click the [Browse] button and specify another installation destination.
PRIMEQUEST 1000 Series Installation Manual APPENDIX B Manual PSA Installation and Uninstallation FIGURE B.4 Setup complete window 5. You may need to restart your computer. If so, a confirmation dialog box appears. The dialog box asks whether you want to restart the computer immediately.
PRIMEQUEST 1000 Series Installation Manual APPENDIX B Manual PSA Installation and Uninstallation - With [Accept SNMP packets from any host] selected: SNMP security is not configured. - With [Accept SNMP packets from these hosts] selected: If neither the MMB IP address nor localhost is set, SNMP security is configured.
For details on the command, see 4.8 SNMP Security Setting Command (setsnmpsec) in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN). - You will be changing the SNMP Service security setting from [Accept SNMP packets from any host] to [Accept SNMP packets from these hosts].
PRIMEQUEST 1000 Series Installation Manual APPENDIX B Manual PSA Installation and Uninstallation You can use the above registry key to specify the wait time (ms) before the service is terminated in the shutdown sequence. - The event log may have the following message recorded during PSA startup. It does not indicate any operational problem.
PRIMEQUEST 1000 Series Installation Manual APPENDIX B Manual PSA Installation and Uninstallation FIGURE B.5 Select Features window B.3.3 Installing PSA Install the PSA package. Prepare the ServerView Suite DVD supplied with the main unit. Operations 1. Execute Tools\General\PSA\fjpsaxxxx.exe (xxxx: Version number).
PRIMEQUEST 1000 Series Installation Manual APPENDIX B Manual PSA Installation and Uninstallation FIGURE B.6 Preparing to Install window 2. The following window appears when installation preparations are completed. Click the [Next] button to proceed. FIGURE B.7 Setup window 3. Specify the installation destination. Then, click the [Next] button.
PRIMEQUEST 1000 Series Installation Manual APPENDIX B Manual PSA Installation and Uninstallation The default installation path for PSA is Program Files\Fujitsu or Program Files(x86)\Fujitsu. To change the installation destination, click the [Browse] button and specify another installation destination. FIGURE B.8 Select Features window 4.
PRIMEQUEST 1000 Series Installation Manual APPENDIX B Manual PSA Installation and Uninstallation FIGURE B.9 Installation complete window B.3.4 Automatic configuration during PSA installation This section describes the values automatically set for PSA operation during PSA installation. Service settings - PRIMEQUEST Server Agent...
PRIMEQUEST 1000 Series Installation Manual APPENDIX B Manual PSA Installation and Uninstallation B.3.5 Settings after PSA installation This section describes the settings for items after PSA installation. Setting the destinations of traps from a partition Setting the destinations of traps and e-mail via the MMB...
Page 284
PRIMEQUEST 1000 Series Installation Manual APPENDIX B Manual PSA Installation and Uninstallation C122-E107-09EN...
APPENDIX C Software (Links) For details on the software bundled with the PRIMEQUEST 1000 series hardware, see 3.3 Bundled Software in the PRIMEQUEST 1000 Series General Description (C122-B022EN). C.1 General Description and Types of Bundled Software ..
PRIMEQUEST 1000 Series Installation Manual APPENDIX C Software (Links) General Description and Types of Bundled Software See 3.3 Bundled Software in the PRIMEQUEST 1000 Series General Description (C122-B022EN). C122-E107-09EN...
APPENDIX D Configuring the SAN Boot Environment For details on configuring the SAN boot environment, see the PRIMEQUEST 1000 Series SAN Boot Environment Configuration Manual (C122-E155EN).
APPENDIX E Notes on VMware Installation This appendix describes how to install VMware vSphere, using a RAID environment configured in built-in hard disks as an example. It also provides notes on installation. VMware vSphere is referred to below as VMware 4.x, VMware 5.x, or VMware.
APPENDIX E Notes on VMware Installation Building a RAID Environment Using VMware 4.x Built-in Disks The PRIMEQUEST 1000 series supports RAID 0, RAID 1, RAID 1E, RAID 5, RAID 6, and RAID 10 that use built-in hard disks. For details on building a RAID configuration using built-in hard disks, see the MegaRAID SAS Software, the MegaRAID SAS Device Driver Installation, and the Modular RAID Controller Installation Guide.
PRIMEQUEST 1000 Series Installation Manual APPENDIX E Notes on VMware Installation Notes on VMware 4.x Installation Install VMware 4.x by following the instructions in the VMware vSphere 4.x Software Handbook. For details on the VMware 4.x information and procedures that you need to know for PRIMEQUEST system configuration, contact the distributor where you purchased your product, or your sales representative.
PRIMEQUEST 1000 Series Installation Manual APPENDIX E Notes on VMware Installation - Enter a value between 1 and 100 minutes for [Timeout]. FIGURE E.2 [Watchdog] tab in the VMware 4.x software window 6. Enter your user name and password, and press the [Enter] key.
PRIMEQUEST 1000 Series Installation Manual APPENDIX E Notes on VMware Installation Installing VMware 4.x Bundled Software The bundled software is stored in ServerView Suite DVD1. Copy the files from ServerView SuiteDVD1 and use them. E.3.1 Installing ServerView Agent Install ServerView Agent by referring to the following manuals: - ServerView Suite ServerView Operations Manager V4.92...
APPENDIX E Notes on VMware Installation 1. Start the terminal with root privileges. 2. Mount ServerView Suite DVD1. 3. Copy the RAS support service module to any directory of the PRIMEQUEST 1000 series, and extract it. # cp MNT/SVSLocalTools/Japanese/RASAssist/Linux/\ LinuxRAS.tgz /tmp # cd /tmp # tar xvzf LinuxRAS.tgz...
Page 295
- HRM/SR_Linux/FJSVhrmsr.tgz is available 1. Start the terminal with root privileges. 2. Mount ServerView Suite DVD1. 3. Copy the HRM/server module to any directory of the PRIMEQUEST 1000 series server. Then, expand the files. # cp MNT/SVSLocalTools/Japanese/HRM/SR_Linux/ \ FJSVhrmsr.tgz /tmp MNT is the mount point.
PSA is provided only with the PRIMEQUEST 1800E. 1. Start the terminal with root privileges. 2. Mount ServerView Suite DVD1. 3. Copy the PSA module to any directory of the PRIMEQUEST 1000 series server. Then, expand the files. # cp MNT/SVSLocalTools/Japanese/PSA/SR_Linux/\ FJSVpsa-XXXRHEL5.tgz /tmp * MNT is the mount point.
PRIMEQUEST 1000 Series Installation Manual APPENDIX E Notes on VMware Installation # cd /tmp # tar xvzf FJSVpsa-XXXRHEL5.tar.gz 4. Execute the following command. # cd FJSVpsa ./INSTALL.sh -SVIM 5. After the installation of PSA, make the required settings. For details on the setting method, see PSA Setting Procedure for VMware and 6.2 Configuring PSA (Linux: Red Hat Enterprise...
PRIMEQUEST 1000 Series Installation Manual APPENDIX E Notes on VMware Installation Settings after VMware 4.x PSA Installation The settings after PSA installation for VMware 4.x partly differ from those for RHEL. This section describes only the different parts. For details on the parts of the setting procedure that are the same as those for RHEL, see the following.
PRIMEQUEST 1000 Series Installation Manual APPENDIX E Notes on VMware Installation FIGURE E.5 Network configuration immediately after installation of OS Remark For details on each command used in the settings below, use man for confirmation. Note Do not set the host name before setting the IP address of vswif0, which exists by default immediately after the installation of the operating system.
Page 300
PRIMEQUEST 1000 Series Installation Manual APPENDIX E Notes on VMware Installation \: This indicates that there is no line feed. In the above example, vmnic0 is used for the PSA-to-MMB communication LAN, and vmnic1is used for the management LAN. Configuring the management LAN 1.
Page 301
PRIMEQUEST 1000 Series Installation Manual APPENDIX E Notes on VMware Installation PortGroup Name VLAN ID Used Ports Uplinks VM Network Service Console 0 Execute the esxcfg-vswitch command to connect the physical adapter vmnic1 to vSwitch0. # esxcfg-vswitch -L vmnic1 vSwitch0...
Page 302
PRIMEQUEST 1000 Series Installation Manual APPENDIX E Notes on VMware Installation PortGroup Name VLAN ID Used Ports Uplinks \: This indicates that there is no line feed. 2. Execute the esxcfg-vswtich command to connect the physical adapter vmnic0 to the virtual switch.
PRIMEQUEST 1000 Series Installation Manual APPENDIX E Notes on VMware Installation TABLE E.2 IP addresses to be set for virtual ports Partition number IP address Subnet mask 172.30.0.2 255.255.255.0 172.30.0.3 172.30.0.4 172.30.0.5 <Example with the partition number of #2 and the PSA-MMB port group of vswif1>...
PRIMEQUEST 1000 Series Installation Manual APPENDIX E Notes on VMware Installation FIGURE E.6 Network configuration after setup E.4.2 Configuring the firewall This section describes how to configure the firewall for PSA operation. For PSA, the following ports must be open.
PRIMEQUEST 1000 Series Installation Manual APPENDIX E Notes on VMware Installation #esxcfg-firewall -q Opened ports: SNMP : port 161 udp.in PSA-MMB : port 5000 tcp.out E.4.3 Configuring the default gateway Configure the default gateway when installing the operating system. If the default gateway is not configured for some reason, make this setting.
PRIMEQUEST 1000 Series Installation Manual APPENDIX E Notes on VMware Installation 5. Click the [Routing] tab, and make the [Default gateway] setting in the [Service Console] area. Then click the [OK] button. FIGURE E.8 [DNS and Routing Configuration] dialog box Note For details on VMware vSphere 4.x Client, see the manual of VMware 4.x.
PRIMEQUEST 1000 Series Installation Manual APPENDIX E Notes on VMware Installation In VMware 4.x, the core file is output in /var/core, and is not automatically deleted. After executing the vm-support command, we recommend deleting the core file as required. E.4.5 Notes on VMware 4.x PSA...
PRIMEQUEST 1000 Series Installation Manual APPENDIX E Notes on VMware Installation Settings after VMware 4.x SVmco Installation The settings are required for SVmco operation. For details on the SVmco settings, see the ServerView Mission Critical Option user manual. Contact your sales representative for inquiries about the ServerView manuals.
APPENDIX E Notes on VMware Installation Building a RAID Environment Using VMware 5.x Built-in Disks The PRIMEQUEST 1000 series supports RAID 0, RAID 1, RAID 1E, RAID 5, RAID 6, and RAID 10 that use built-in hard disks. For details on building a RAID configuration using built-in hard disks, see the MegaRAID SAS Software, the MegaRAID SAS Device Driver Installation, and the Modular RAID Controller Installation Guide.
PRIMEQUEST 1000 Series Installation Manual APPENDIX E Notes on VMware Installation Installing VMware 5.x Bundled Software The bundled software is stored in ServerView Suite DVD1. Copy the files from ServerView SuiteDVD1 and use them. The bundled software required for VMware vSphere 5 comprises the following.
APPENDIX F Setting up the NTP Server (Windows) This appendix describes how to specify and set of an NTP server for a specific Windows operating system. This appendix is not needed for Active Directory member servers. Active Directory member servers automatically synchronize the system clock with the domain controller.
In the PRIMEQUEST 1000 series, the system time of a partition is kept in the Home SB. Therefore, if the Home SB of a partition is replaced during maintenance or switched by the reserved SB function, the system time of the partition may become incorrect.
Page 313
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) Task name Task description Target OS Event Task Register the following in Task Scheduler to synchronize with the Windows Server 2008 Settings System time when the time can be acquired from an NTP server: Windows Server 2008 R2 Log: "System", Source: "Time-Service", ID:37...
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) NTP Settings in Windows Server 2003 The procedures in this chapter require Administrator privileges. All screenshots are display examples, and the actually displayed contents vary depending on the system configuration and other factors.
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) FIGURE F.3 [Run] window 2. Open the following key, and set 900 for the SpecialPollInterval value. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time \TimeProviders\NtpClient "SpetcialPollInterval" Type: REG_DWORD, Data: 900 (decimal) FIGURE F.4 [Registry Editor] window 3.
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) FIGURE F.5 [Services] window 5. Right-click the Windows Time service. Select [Restart] from the context menu. C122-E107-09EN...
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) NTP Settings in Windows Server 2008 The procedures in this chapter require Administrator privileges. All screenshots are display examples, and the actually displayed contents vary depending on the system configuration and other factors.
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) FIGURE F.8 [Internet Time Settings] window 4. Click the [OK] button to close the [Internet Time Settings] dialog box. 5. Click the [OK] button to close the [Date and Time] dialog box.
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) 4. Open [Start] - [Administrative Tools] - [Services]. FIGURE F.11 [Services] window 5. Right-click the Windows Time service. Select [Restart] from the context menu. F.3.3 Event Task Settings 1.
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) FIGURE F.13 [Create Basic Task Wizard] window (Create a Basic Task) 4. Select "When a specific event is logged" on the [Task Trigger] screen. Click the [Next] button.
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) 6. Select "Start a program" on the [Action] screen. Click the [Next] button. FIGURE F.16 [Create Basic Task Wizard] window (Action) 7. Set the following parameters on the [Start a Program] screen.
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) 9. Click the [Change User or Group] button in the [Properties] dialog box. FIGURE F.19 [Properties] dialog box 10. [Select User or Group] dialog box appears. Set the following parameter.
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) NTP Settings in Windows Server 2008 R2 The procedures in this chapter require Administrator privileges. All screenshots are display examples, and the actually displayed contents vary depending on the system configuration and other factors.
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) - [Server]: Enter an NTP server name. FIGURE F.23 [Internet Time Settings] window 4. Click the [OK] button to close the [Internet Time Settings] dialog box. 5. Click the [OK] button to close the [Date and Time] dialog box.
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) 4. Open [Start] - [Administrative Tools] - [Services]. FIGURE F.26 [Services] window 5. Right-click the Windows Time service. Select [Properties] from the context menu. 6. Set "Automatic (Delayed Start)" in [Startup Type] in the [Windows Time Properties] dialog box.
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) FIGURE F.28 [Task Scheduler] window 2. Select [Create Basic Task] at the right of the window. [Create Basic Task Wizard] appears. 3. Enter a chosen task name in [Name] on the [Create a Basic Task] screen, and click the [Next] button.
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) FIGURE F.30 [Create Basic Task Wizard] window (Task Trigger) 5. [When a Specific Event Is Logged] screen appears. Set the following parameters. - [Log]: System - [Source]: Time-Service - [Event ID]: 37 FIGURE F.31 [Create Basic Task Wizard] window (When a Specific Event Is Logged)
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) FIGURE F.32 [Create Basic Task Wizard] window (Action) 7. Set the following parameters on the [Start a Program] screen. - [Program/script]: %SystemRoot%\System32\w32tm.exe - [Add arguments] (optional): /resync FIGURE F.33 [Create Basic Task Wizard] window (Start a Program)
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) FIGURE F.34 [Create Basic Task Wizard] window (Summary) Click the [Finish] button. 9. Click the [Change User or Group] button in the [Properties] dialog box. FIGURE F.35 [Properties] dialog box 10.
Page 330
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) 11. Click the [OK] button to close the [Properties] dialog box. C122-E107-09EN...
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) NTP Settings in Windows Server 2012 The procedures in this chapter requireAdministrator privileges. All screenshots are display examples, and the actually displayed contents vary depending on the system configuration and other factors.
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) FIGURE F.38 [Date and Time] window (2) 3. Set the following parameters in the [Internet Time Settings] dialog box. - [Synchronize with an Internet time server]: Check the check box.
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) FIGURE F.40 [Registry Editor] selection window 2. Open the following key, and set 900 for the SpecialPollInterval value. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time \TimeProviders\NtpClient "SpetcialPollInterval" Type: REG_DWORD, Data: 900 (decimal) FIGURE F.41 [Registry Editor] window 3.
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) 5. Right-click the Windows Time service. Select [Properties] from the context menu. 6. Set "Automatic (Delayed Start)" in [Startup type] in the [Windows Time Properties] dialog box.
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) FIGURE F.44 [Task Scheduler] window 2. Select [Create Basic Task] at the right of the window. [Create Basic Task Wizard] appears. 3. Enter a chosen task name in [Name] on the [Create a Basic Task] screen, and click the [Next] button.
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) FIGURE F.46 [Create Basic Task Wizard] window (Task Trigger) 5. [When a Specific Event Is Logged] screen appears. Set the following parameters. - [Log]: System - [Source]: Time-Service - [Event ID]: 37 FIGURE F.47 [Create Basic Task Wizard] window (When a Specific Event Is Logged)
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) FIGURE F.48 [Create Basic Task Wizard] window (Action) 7. Set the following parameters on the [Start a Program] screen. - [Program/script]: %SystemRoot%\w32tm.exe - [Add arguments] (optional): /resync FIGURE F.49 [Create Basic Task Wizard] window (Start a Program)
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) FIGURE F.50 [Create Basic Task Wizard] window (Summary) Click the [Finish] button. 9. Click the [Change User or Group] button in the [Properties] dialog box. FIGURE F.51 [Properties] dialog box 10.
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) FIGURE F.52 [Select User or Group] window Click the [OK] button. 11. Click the [OK] button to close the [Properties] dialog box. C122-E107-09EN...
Page 340
PRIMEQUEST 1000 Series Installation Manual APPENDIX F Setting up the NTP Server (Windows) C122-E107-09EN...
PRIMEQUEST 1000 Series Installation Manual Index Index [Create Basic Task Wizard] window (Action)..[Access Control] window (example)......Accessories required in main unit installation....[Create Basic Task Wizard] window (Create a Basic Task)... [Add a Port] dialog box (PSA)........[Add a Port] dialog box (SNMP)........
Page 342
PRIMEQUEST 1000 Series Installation Manual Index Lists of Settings (Links)..........Packages required for PSA operation (RHEL5).... Packages required for PSA operation (RHEL6).... Packages required for SIRMS operation (RHEL6)..Maintenance status display..........[Partition Configuration] window (example)..[Management LAN Port Configuration] window (example) [Partition Home] window (example)........
Page 343
PRIMEQUEST 1000 Series Installation Manual Index Settings automatically added/changed during PSA Work after Operating System Installation (PRIMEQUEST installation........... 1800E2)................Settings for system clock syncronization....... Work before Operating System Installation..... Settings for terminal software.......... Work performed by the user..........Setting Up the Dump Environment (Linux)..