Figure 1.49 [Partition Home] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
Back to [Partition Configuration] window.
[Message]
This section describes the messages to be displayed on this window.
Message Number
E_00022 The partition doesn't have a node.
W_00505 Unable to set configuration because the power on/off is processing.
For details on the messages displayed on the window, see
(C122-E178EN).
[Partition Home] window
If you select the partition using the radio button on the [Partition Configuration] window and click the [Home]
button, [Partition Home] window is displayed.
1. Select the SB which is considered as the Home SB, by using the radio button.
When SB which is set as Home SB is not mounted, the background color is displayed in gray.
You can switch from the selected radio button on a grayed row to a radio button on a row that is
not grayed. However, if the selection on the row displayed in gray is removed once, it is not
possible to select the original radio button again.
When the Home SB is not set, the SB which is initially installed in the partition by default is
considered as the Home SB. However, when the Home SB is removed and degenerated, SB with
smallest number is the Home SB.
2. Click the [Apply] button.
Confirmation dialogue box is displayed.
3. Click the [OK] button when you want to continue the processing.
Click the [Cancel] button when you want to cancel the processing.
4. Click the [Apply] or the [Cancel] button.
Return to [Partition Configuration] window.
When the [Apply] button is clicked and the power supply of the target partition is ON, change of
[Home] is not possible. A warning dialogue box is displayed.

FIGURE 1.49 [Partition Home] window

Message
PRIMEQUEST 2000 Series Message Reference