Fujitsu PRIMEQUEST 500A Series Installation Manual page 138

CHAPTER 3 Operating System Installation
3.2.2.5 Installing attached software programs
After installing the OS, follow the instructions displayed on the KVM display to
insert the supplied CD-ROM into the OPL DVD-ROM drive and install the attached
software program.
For details of the bundled-software package installer, see the PRIMEQUEST
Installation Support Tool User's Guide (Red Hat) (C122-E005EN) or the
PRIMEQUEST Installation Support Tool User's Guide (SUSE) (C122-E047EN).
3.2.2.6 Work required after installation
After installation is complete, remove the USB floppy drive from the USB port of the
KVM interface unit. Then, proceed with the work required after Linux OS
installation.
For further information, see
Installation."
3-16
Chapter 4, "Work Required After Operating System
C122-E001-10EN