Table 2.17 Displayed And Setting Items In The - Fujitsu PRIMEQUEST 500A Series Installation Manual

CHAPTER 2 Setup
2 Enter the required items.
Table 2.17 Displayed and setting items in the [Management LAN Port Configuration]
VLAN Mode
Speed/Duplex for MMB
(PRIMEQUEST
520A/520/420)
Speed/Duplex for MMB#0
(PRIMEQUEST
580A/540A/580/540/480/440)
Speed/Duplex for MMB#1
(PRIMEQUEST
580A/540A/580/540/480/440)
3
Click the [Apply] button.
2-38
window
Item
Selects an MMB hub VLAN mode.
• [No VLAN Mode]: Enables communication between
MMB ports and all partition ports.
• [VLAN mode]: Disables inter-partition communication.
• [Port disable mode]: Disables inter-partition
communication and communication between MMB ports
and partitions.
Sets Speed/Duplex of MMB#0 port.
• [Auto]: Automatic setting
• [100M/Full]: Full duplex communication at 100 Mbps
• [100M/Half]: Half duplex communication at 100 Mbps
• [10M/Full]: Full duplex communication at 10 Mbps
• [10M/Half]: Half duplex communication at 10 Mbps
Sets Speed/Duplex of MMB#0 port.
• [Auto]: Automatic setting
• [100M/Full]: Full duplex communication at 100 Mbps
• [100M/Half]: Half duplex communication at 100 Mbps
• [10M/Full]: Full duplex communication at 10 Mbps
• [10M/Half]: Half duplex communication at 10 Mbps
Notes: Displayed only when MMB#0 is installed.
Sets Speed/Duplex of MMB#1 port.
• [Auto]: Automatic setting
• [100M/Full]: Full duplex communication at 100 Mbps
• [100M/Half]: Half duplex communication at 100 Mbps
• [10M/Full]: Full duplex communication at 10 Mbps
• [10M/Half]: Half duplex communication at 10 Mbps
Notes: Displayed only when MMB#1 is installed.
Description
Default: [VLAN mode]
Default: [Auto]
Default: [Auto]
Default: [Auto]
C122-E001-10EN