Fujitsu PRIMEQUEST 500A Series Installation Manual page 335

4.13 Saving Setup Information
This section explains how to save the information that has been set.
Saving PSA setup information
Saving EFI configuration information
Remarks:Once the system has been placed into operation, save PSA settings and EFI
4.13.1 Saving PSA setup information
Use the export function to convert the snapshot information retained in PSA into CSV
format and save it to the partition management area.
The export function can be performed in two modes: manual export and automatic
export. A Manual export can be performed on the export screen.
The export function can save up to 100 data files. When 100 files are exceeded, the
least recent file is deleted and a new file is saved.
Exported data remains saved unless the maximum number is exceeded or it is deleted
intentionally.
4.13.1.1 Listing exported files
This section explains what can be done from a listing of files. The screen lists the
files currently exported, in order with the most recent on top.
The following types of operation can be performed from the list display screen:
Saving a snapshot in CSV format to a file
A snapshot of information retained in PSA can be saved in CSV format to a file.
Downloading an exported file to the terminal
An exported file can be downloaded to the terminal.
Deleting an exported file
An exported file can be deleted from the partition management area.
Remarks: For file deletion, see the PRIMEQUEST 580A/540A/520A/500/400 Series
C122-E001-10EN
configuration information at a regular interval.
Reference Manual: Basic Operation/GUI/Commands (C122-E003EN).
(→ 4.13.1)
(→ 4.13.2)
4.13 Saving Setup Information
4-149