Fujitsu PRIMEQUEST 500A Series Installation Manual page 423

Window Major category Minor category Setting item Default value
SNMP Trap SNMP trap-
send destination
setting
Edit User User setting
required for
MMB control
with RMCP
Access Control Access control
setting for the
network
protocol to
ensure MMB
security
C122-E001-10EN
System or user Community/
name setting User
IP address IP Address
setting of the
trap-send
destination
SNMP version SNMP
setting Version
Security level Auth
setting
Hash function Auth Type
setting
Setting user User name
name
Password Password
setting
Setting user Privilege
account
privileges
Setting for Status
enabling or
disabling a user
account
Subnet mask of Subnet Mask None
an IP address
that can be used
for connection
Possible values
None
None 0 to 255, 0 to 255,
0 to 255, 0 to 255
None • 1
• 2
• 3
None • noauth
• auth
• priv
None • MD5
• SHA
user 0 to user 23 8 to 16
None 8 to 16
No Access • Admin
• Operator
• User
• CE
• No Access
Disabled • Enabled
• Disabled
0 to 255
E.1 Setting Items for MMB
Remarks
Valid only for
SNMP version 3
Only en-sized
alphabetic
characters
(uppercase and
lowercase letters)
and en-sized
numeric characters
can be used.
Only en-sized
alphabetic
characters
(uppercase and
lowercase letters)
and en-sized
numeric characters
can be used.
A user for which
"No Access" is set
does not have
remote access to the
system.
Example:
255.255.255.0
E-11