Fujitsu PRIMEQUEST 500A Series Installation Manual page 221

8 Execute snmpsetup.sh in the above directory.
Executing this command automatically generates the snmpv3 password used for
the PSA internal communication.
Command syntax:
./snmpsetup.sh install
9
Start PSA.
Command syntax:
/sbin/service y30FJSVpsa start
4.3.8 PSA update installation
Using the following commands in the order shown, stop the PSA service, and perform
update installation for the PSA package.
Note:
Command syntax:
/sbin/service y30FJSVpsa stop
/bin/rpm -Uvh FJSVpsa-X.X.X-X.ia64.rpm
/sbin/service y30FJSVpsa start
* X.X.X-X indicates the PSA version.
4.3.9 SIRMS update installation
Using the following commands, perform update installation for the two SIRMS
packages.
Command syntax:
/bin/rpm -Uvh sirms-X.X.X-X.ia64.rpm
/bin/rpm -Uvh FJSVsoftmsg-X.X.X-X.ia64.rpm
* X.X.X-X indicates the version.
C122-E001-10EN
4.3 PSA Installation (Linux: Red Hat) (PRIMEQUEST 520A/520/420)
If the PEXU has been mounted, use PSA-1.10 or later.
4-35