Fujitsu PRIMEQUEST 500A Series Installation Manual page 233

Editing the ifcfg file of the NIC interface for the management LAN
# rcnetwork stop
# rm /etc/sysconfig/network/ifcfg-eth-id-<hardware-address>
..
# vi /etc/sysconfig/network/ifcfg-<Bonding interface-name>
Change or add lines as shown below.
Example:The editing of the ifcfg file shown in the following examples assumes that
ifcfg-bond0:
BOOTPROTO='static'
MTU=''
REMOTE_IPADDR=''
IPADDR='192.168.16.138' # Same subnet as the MMB
NETMASK='255.255.255.0'
BROADCAST='192.168.16.255'
STARTMODE='onboot'
BONDING_MASTER=yes
BONDING_SLAVE_0='bus-pci-0000:01:08.0'
# bus-info number of the NIC for management LAN#0
BONDING_SLAVE_1='bus-pci-0000:01:00.0'
# bus-info number of the NIC for management LAN#1
The Bonding interface is activated with the restart of the network service.
Command syntax
/sbin/service network restart
To make the NIC settings for the management LAN effective, PSA needs to be
restarted.
Command syntax
/etc/init.d/y30FJSVpsa stop
/etc/init.d/y30FJSVpsa start
C122-E001-10EN
4.4 PSA Installation (Linux: SUSE) (PRIMEQUEST 500A/500/400 series common)
the Bonding interface is ifcfg-bond0.
4-47