Fujitsu PRIMEQUEST 500A Series Installation Manual page 158

CHAPTER 3 Operating System Installation
3.3.4 Windows Installation using the KVM (PRIMEQUEST 580A/540A/
580/540/480/440)
3.3.4.1 Hardware requirements and procedure
The devices listed below must be prepared in order to use the KVM to install
Windows on the SAN disk. The installation procedure assumes that all the following
devices are connected:
• Keyboard
• Display
• Mouse
• SAN storage unit (e.g., ETERNUS)
• Fibre Channel card
• Optical fiber cable
• Floppy disk drive
It must be prepared separately. This is connected during the Windows
installation procedure.
Remarks: For the connections between the PRIMEQUEST machine and ETERNUS
The installation procedure is as follows:
3-36
units, see the topologies shown in the SAN storage (e.g., ETERNUS)
manuals.
C122-E001-10EN