Fujitsu PRIMEQUEST 500A Series Installation Manual page 154

CHAPTER 3 Operating System Installation
(3) Setting up the deployment server
1
Register the partition on which you are installing the Linux OS, in the
deployment server. For this purpose, use the GUI environment (deployment
console) provided by SystemcastWizard Lite. For information on the procedure,
see the PRIMEQUEST SystemcastWizard Lite User's Guide (C122-E010EN).
(4) Obtaining resources required for installation
For the resources required for installation using SystemcastWizard Lite, see the
PRIMEQUEST SystemcastWizard Lite User's Guide (C122-E010EN).
3.3.2.3 Installing the Windows
Create resources on the deployment console, and issue a request to install Windows.
For information on the procedure, see the PRIMEQUEST SystemcastWizard Lite
User's Guide (C122-E010EN).
Remarks:
3-32
When installation is completed, perform the work required after operating
system installation. For details on this work, see
required after operating system installation,"
The High-Reliability Tools can be installed together with the operating
system by SystemcastWizard Lite. For details, see the PRIMEQUEST
SystemcastWizard Lite User's Guide (C122-E010EN).
See Table 3.9 for the product ID locations.
Section 3.1.4, "Work
C122-E001-10EN