Fujitsu PRIMEQUEST 500A Series Installation Manual page 130

CHAPTER 3 Operating System Installation
(2) Setting up the EFI
Set up the EFI for the partition on which you are installing the OS to ensure that the
system will be booted from the DVD-ROM.
1
On the MMB Web-UI window, click [Partition]
Control].
The [Boot Control] window appears.
2 Select [Force boot from DVD] in [Boot Selector], and click the [Apply] button.
(3) Setting PCI address mode
Set "PCI Bus Mode" as the PCI address mode of the partition in which the operating
system is to be installed.
1
From the Web-UI window of the MMB, click [Partition]
[Mode].
The [Mode] window appears.
Figure 3.4 [Mode] window (PRIMEQUEST 580A/540A)
3-8
Figure 3.3 [Boot Control] window
→ →
[Partition#x] [Boot
→
[Partition #x]
C122-E001-10EN
→