Fujitsu PRIMEQUEST 500A Series Installation Manual page 133

3.2.2 Linux installation using the independent KVM switch
(PRIMEQUEST 520A/520/420)
3.2.2.1 Hardware requirements and procedure
For installing using the independent KVM switch, you must first create a config file.
A config file is a file that contains OS installation option settings, etc. Use the
installation support tool to create a config file.
Table 3.4
tool. For details, see the PRIMEQUEST Installation Support Tool User's Guide (Red
Hat) (C122-E005EN) or the PRIMEQUEST Installation Support Tool User's Guide
(SUSE) (C122-E047EN).
Table 3.5 System requirements for the installation support tool
Hardware
When config file creation is complete, the following devices are required for the
installation:
• Display
• USB Keyboard
• USB Mouse
• USB floppy disk drive
The installation procedure is as follows:
C122-E001-10EN
provides an outline of the system requirements for the installation support
Classification Compatible environment
A personal computer running Windows
The OS must be one of the following:
• Windows 2000 Professional Service Pack4 or later
• Windows XP Home Edition Service Pack2 or later
• Windows XP Professional Service Pack2 or later
* Only the 32-bit version of the OS
3.2 Linux Installation
3-11