Note On Safety; Important Alert Messages - Fujitsu PRIMEQUEST 500A Series Installation Manual

2

Important Alert Messages

This manual provides the following important alert signals:
This indicates a hazardous situation that could result in minor or moderate
personal injury if the user does not perform the procedure correctly. This signal
also indicates that damage to the product or other property may occur if the user
does not perform the procedure correctly.
Task
Normal
operation
C122-E001-10EN

NOTE ON SAFETY

Malfunction
The MMB Web-UI (Web user interface) supports the
following browsers. Note that other browsers may not
correctly display the Web UI.
Microsoft® IE (Internet Explorer) v5.5 (SP2) or later
Netscape v7.02 or later
Data destruction
When power to the main processing unit is turned off in an
operation from the MMB, only the following LEDs of the
OPL and the MMB stay lit:
MMB-Ready LED of the OPL
Power LED of the MMB
Ready LED of the MMB
Active LED of the MMB
Before turning off the main power (UPS, power
distribution box, circuit breaker switches, etc.), be sure to
confirm that all LEDs other than the above are off.
Otherwise, turning off the main power may cause damage
to data.
Data destruction
Before shutting down power, make sure the following
events have occurred; otherwise, data may be destroyed:
All applications have completed processing.
No user is using a component.
Warning Page
P.2-9
P.C-6
P.C-8
P.C-10
vii