Table of Contents
Advertisement
CHAPTER 5 Security Setup
5.1.4
Specifying HTTPS parameters
Specify HTTPS parameters for MMB. This can be performed by users with
administrator privilege.
To enable HTTPS, a valid SSL certificate must have been registered. If the user
attempts to enable HTTPS without the certificate being registered, an error is
displayed.
You do not need to perform this step if it has already been performed by the certified
service engineer for test program execution.
Procedure
1
Click [Network Configuration]
The [Network Protocols] window is displayed.
5-14
Figure 5.8 [Network Protocols] window (example)
→
[Network Protocols].
C122-E001-10EN
Advertisement
Chapters
Table of Contents
