Fujitsu PRIMEQUEST 500A Series Installation Manual page 137

(5) Turning on the power to the partition
Turn on the power to the partition as described below.
If the power is already on, reset the partition.
1
On the MMB Web-UI window, click [Partition]
The [Power Control] window appears.
2
From [Power Control] of the partition that is the installation target, select [Power
On].
Remarks: If the power to the partition is already on, select [Reset].
3
Click the [Apply] button.
3.2.2.4 Installing the Linux OS
Boot the OS from the CD to install it.
For details, see the PRIMEQUEST Installation Support Tool User's Guide (Red Hat)
(C122-E005EN) or the PRIMEQUEST Installation Support Tool User's Guide
(SUSE) (C122-E047EN).
Follow the instructions from the installer displayed on the display to change the
CD-ROM. After Linux OS installation is complete, the system is rebooted.
C122-E001-10EN
Figure 3.9 [Power Control] window
3.2 Linux Installation
→
[Power Control].
3-15