Figure 2.18 [Date/Time] Window - Fujitsu PRIMEQUEST 500A Series Installation Manual

CHAPTER 2 Setup
2.2.4.4 Setting the date and time
Set the MMB date and time and NTP (when the NTP server is used).
You do not need to perform this step if it has already been performed by the certified
service engineer for test program execution.
Remarks: The MMB has NTP client and NTP server functions. The NTP client
Procedure
1
Click [Network Configuration]
The [Date/Time] window is displayed.
2-32
function of the MMB makes time adjustments using the other NTP server.
Each PRIMEQUEST partition uses the NTP server function of the MMB
to adjust the time in a partition.
However, the MMB need not be specified for the NTP servers in any of the
partitions. For stable NTP operation, specify multiple NTP servers from
the NTP client (Fujitsu recommends at least three).

Figure 2.18 [Date/Time] window

→
[Date/Time].
C122-E001-10EN