2.5.4.2
Removing an SB, IO Unit, or IOX
This section explains how to remove an SB, IO Unit, or IOX from the partition.
Remarks: You cannot remove an SB, IO Unit, or IOX from a partition while the OS
Procedure
1
Click [Partition]
The [Partition Configuration] window is displayed.
Figure 2.30 [Partition Configuration] window (PRIMEQUEST
Figure 2.31 [Partition Configuration] window (PRIMEQUEST 520A/520/420)
C122-E001-10EN
of the partition is operating. In such cases, set the partition power to the
standby state, and then remove the SB, IO Unit, or IOX.
→
[Partition Configuration].
580A/540A/580/540/480/440)
2.5 Partition Initialization
2-55