Fujitsu PRIMEQUEST 500A Series Installation Manual page 183

Software product name
/ Item to be installed
Setup
Enabling RemoteDesktop Automatically sets up a remote desktop to enable remote
Enabling Kernel Memory
Dump
PXH setting change
PEX setting change
3.3.6.2 Notes on using the PRIMEQUEST Software Installer
The Windows Server 2003 DVD-ROM is required for PSA installation.
SNMP must already be installed for PSA installation. If SNMP is not installed, the
PRIMEQUEST Software Installer displays a message prompting the user to insert
the Windows Server 2003 DVD-ROM and install SNMP. Prepare the Windows
Server 2003 DVD-ROM in advance.
Intel PROSet and Xframe Control Panel are not automatically installed.
Intel PROSet and Xframe Control Panel are not automatically installed. Intel
PROSet is stored in the "Not_installed" folder on the desktop. Install it manually.
Drivers/tools are installed only when their devices are recognized.
Drivers and corresponding tools are not installed unless their devices (LAN cards,
Fibre Channel cards, etc.) are mounted in the IO Unit of the partition.
SIRMS and HRM/server are installed only under a Japanese version of Windows
SIRMS, SIRMS MNS, and HRM/server are installed only under a Japanese
version of Windows.
Some messages may appear during the installation process.
When a dialog box with warning that a driver has not passed Windows logo testing
is displayed during installation, click [Yes] to continue the installation process.
Some installed tools may again be installation targets.
Though the PRIMEQUEST software installer has already installed these tools,
they may again be installation targets. They will be installed again, but this is not a
problem.
C122-E001-10EN
management.
Automatically makes dump settings in preparation for failures.
Makes PXH settings.
Makes PXH settings.
3.3 Windows Installation
Description
3-61