Fujitsu PRIMEQUEST 500A Series Installation Manual page 369

Appendix B Installation Procedure
A
This appendix describes the procedure for PRIMEQUEST installation. Such
installation includes the following types of operations:
Connecting a general-purpose PC
Initializing the MMB
Logging in to the Web-UI
B.1 Connecting a General-purpose PC
This section describes the procedure for connecting a general-purpose PC to the
PRIMEQUEST main unit.
1
Connect the COM port on the general-purpose PC to the RS-232C external
interface of the MMB, with an RS-232C cross cable ((1) in
2
Connect the LAN port on the general-purpose PC to the LAN (maintenance)
external interface of the MMB, with a LAN cable ((2) in
Remarks: BMM#1 is supported only in the PRIMEQUEST 500A/500 series.
C122-E001-10EN
Figure B.1).
Figure B.1).
B-1