Fujitsu PRIMEQUEST 500A Series Installation Manual page 61

Notation used for window operation
The window operations in this manual are described as follows:
Menu operation of Web UI
→
[ ] [ ]
Example: Describing the operation procedure for displaying the [System Status]
Describing multiple menus indicated in the same hierarchy
[ ]/[ ]/[ ]/[ ]
Example: Describing the operation procedure for displaying the [Port
Describing one of multiple components (The actual Web-UI is indicated with a
number.)
Component-name#x
Example: Describing a partition number in the second hierarchy
If one of the MMB error or warning states shown in the following "operation
interruption check conditions" occurs, refrain from operating the window. Instead,
contact your Fujitsu certified service engineer.
Operation interruption check conditions
• The Alarm LED on the MMB is on.
• The Active LEDs on both MMB#0 and MMB#1 are off.
• A connection to the MMB Web-UI cannot be established.
• The Alarm LEDs on two or more boards in the main unit are on.
• "ReadError" is displayed on the MMB Web-UI.
• "Not Present" is displayed for the state of every unit in the [System Status]
window of the MMB Web-UI.
C122-E001-10EN
window
→
Click [System] [System Status]. (Select the items in order of
indication.)
Configuration] window of the IOU, front panel, port-channel, or
partition
→
Click [Switch] [GSWB#x]
[Front Panel]/[port-channel]/[Partition].
→
Click [Partition] [Partition#x]
2.2 MMB Connection and Setup
→ →
[Port] [Port Configuration]
→
[Mode].
→
[IOU]/
2-15