Fujitsu PRIMEQUEST 500A Series Installation Manual page 324

CHAPTER 4 Work Required After Operating System Installation
Figure 4.60 MMB virtual IP address setting example
Notes:
1. If the [Synchronize with the Internet time server automatically] check box is
selected, the MMB automatically synchronizes with the specified NTP server.
2. By default "time.windows.com" is specified in the [Server:] box.
3. If synchronization cannot be established with the NTP server, a Win32Time
error is indicated in the event log.
4. An MMB physical IP address is used in communication for time
synchronization with an external NTP server. In case a setting such as a
firewall security setting needs to be changed to enable communication, note
that communication needs to be enabled not only with the MMB virtual IP
address (Virtual IP address), but also with the corresponding physical IP
addresses (MMB#0 IP address and MMB#1 IP address).
5. If [Update Now] is clicked within three minutes after the procedure described
in
wait at least three minutes, and then click [Update Now] again.
6
Click [OK] button to save the settings.
4-138
Section 4.11.2, "NTP server setup," synchronization may fail. In this event,
C122-E001-10EN