Fujitsu PRIMEQUEST 500A Series Installation Manual page 180

CHAPTER 3 Operating System Installation
3.3.6 High-Reliability Tools
The Drivers CD contains drivers and applications providing stable operation. These
drivers and applications are referred to as the High-Reliability Tools.
The High-Reliability Tools can be installed in different ways depending on how
Windows is installed:
Installing Windows by using SystemcastWizard Lite
The High-Reliability Tools are automatically installed.
Installing Windows by using Installation Support Tool for Windows
The Drivers CD containing the High-Reliability Tools needs to be manually
inserted into the DVD-ROM drive after Windows is installed. The High-
Reliability Tools are then automatically installed.
Installing Windows using the KVM
The High-Reliability Tools need to be manually installed after Windows is
installed.
3.3.6.1 Installation using the PRIMEQUEST Software Installer
The PRIMEQUEST Software Installer automatically checks whether the applicable
tools are installed, and it automatically installs the tools that have not been installed.
The installer applies the latest drivers. This section describes the installation
procedure using the PRIMEQUEST Software Installer.
1
Log in as a user (e.g., administrator) with the administrator privilege to the
applicable partition running Windows.
2
Insert the Drivers CD into the DVD-ROM drive.
Depending on the server model, the DVD-ROM drive can be found at the
following locations:
• PRIMEQUEST 580A/540A/580/540/480/440: KVM interface unit
• PRIMEQUEST 520A/520/420: OPL unit
3
Click [Start]
4
Enter the following in the [Name] field, and click [Run]:
DVD-ROM drive:\pqsetup.exe
The PRIMEQUEST Software Installer starts, and the following window is displayed.
3-58
→
[Run]. The [Run] dialog box opens.
C122-E001-10EN