Figure 2.11 [Network Interface] Window (Primequest 520A/520/420); Table 2.7 Displayed And Setting Items In The [Network Interface] Window - Fujitsu PRIMEQUEST 500A Series Installation Manual

CHAPTER 2 Setup

Figure 2.11 [Network Interface] window (PRIMEQUEST 520A/520/420)

2
Click [Enable] for the [DNS] item under [DNS (optional)], and enter values for
each item.

Table 2.7 Displayed and setting items in the [Network Interface] window

DNS
DNS Server1
DNS Server2
DNS Server3
3 After all necessary settings have been made, click the [Apply] button.
2.2.3.5 SMTP settings
Set up MMB SMTP (Simple Mail Transfer Protocol). More specifically, specify
whether to report errors by e-mail if they occur during operation. If you specify
reporting by e-mail, you will also need to specify the error level and the report
destinations.
2-22
Item
Specify whether to use the DNS server.
Enabled: Use the DNS server.
Disabled: Do not use the DNS server.
The default is [Disabled].
Specify the IP address of DNS server 1.
Specify the IP address of DNS server 2.
Specify the IP address of DNS server 3.
Description
C122-E001-10EN