Figure 3.22 Example Of [Partition Home] Window - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 3 Work before Operating System Installation
3.4 Partition Configuration (Physical Partition)
If there is more than one partition, select the partition by checking to radio button in [Partition Configuration] window.
2. Selecting a SB as the Home SB for the partition.
3. Click the radio button for the selected Home SB.
Remark
As long as SB is set as Home even if it is not mounted, it is displayed as gray out. The radio button on the row which
is shown as grayed out can be changed to the radio button on the row which is not shown as grayed out. Once the
radio button is disabled from gray out display, the original radio button cannot be selected again.
4. Click [Apply] button.
→ A confirmation dialogue box is displayed.
Note.
At the time of clicking the [Apply] button, if the power supply for the partition has been turned on, Home cannot be
changed. A warning dialogue box is displayed.
5. Click [OK] button to continue the process, click [Cancel] button to cancel the process.
Returns to [Partition Configuration] window.
Example of [Partition Home] Window
FIGURE 3.22
36
CA92344-0536-01