Fujitsu PRIMEQUEST 500A Series Installation Manual page 343

5.1.2 System SNMP setting
Set Simple Network Management Protocol (SNMP). The SNMP can be set with the
Administrator privilege. Specify whether to notify the linked management software if
an error occurs during operation. To notify the linked management software, specify
the report destination. Set the following four.
Enabling SNMP
Setting SNMP detail
Setting an SNMP trap send destination
SNMP v3 setting
Enabling SNMP
• Procedure
1 Click [Network Configuration]
The [Network Protocols] window is displayed.
C122-E001-10EN
Figure 5.3 [Network Protocols] window (example)
→
[Network Protocols]
5.1 Security Settings
5-5