Table 3.4 Input Items For The [Customer Information] Window - Fujitsu Primequest 2000 Series Installation Manual

CHAPTER 3 REMCS Service Start Procedure
3.2 REMCS Center Registration
You can use the following characters and symbols for input.
- E-mail addresses must include, but cannot begin or end with, an @ mark. Also, the character that follows
the @ mark must not be a dot (.).
- E-mail addresses must not use the following symbols: ( ) < > ; : [ ] \.
The input items and values for the customer information are as follows.
Input item Maximum
number of
characters
Company 30
Name
Department/ 20
Division
Address 30
Administrator 20
Name
Administrator 60
Email Address
Zip/Postal (*2)
Code
Phone 20
Number
FAX Number 20
Machine 32
Unique Name
Country 2
FIGURE 3.8 [Customer Information] window

TABLE 3.4 Input items for the [Customer Information] window

Input
Required
Optional
Required
Required
Required
Optional
Required
Optional
Optional
Required
Personal Description
information
(*1)
N/A Enter the company name.
N/A Enter your department/division name.
N/A Enter the address.
Applicable Enter the server administrator name.
Applicable Enter the server administrator's e-mail
address in single-byte alphanumeric
characters and symbols.
E-mail notifications of completed
registration or error occurrences are sent
to this e-mail address.
N/A Enter the zip/postal code for your
company address in single-byte numeric
characters and '-'.
Applicable Enter the phone number in single-byte
numeric characters/symbols and '-'.
Applicable Enter the FAX number in single-byte
numeric characters/symbols and '-'.
N/A Enter the unique name at your site in
single-byte alphanumeric characters and
symbols.
N/A Enter the installation country in alphabetic
characters ("JP" for Japan; lower case
characters are converted to upper case
15
CA92344-0542-02