Fujitsu PRIMEQUEST 500A Series Installation Manual page 415

Window Major category Minor category Setting item Default value
System Setup Setting of
GSWB OFF at
shutdown
(only for
PRIMEQUEST
580A/540A/
580/540/480/
440)
Setting of
mounting
altitude
Setting of
Mirror Mode
System Power Cabinet power
Control ON/OFF control
Power Control Partition power
control
Schedule Partition
Control scheduled-
operation
setting
C122-E001-10EN
Setting to Power
synchronically Linkage
turn off the Mode
power to the
cabinet and
GSWB
Setting Altitude
mounting
altitude
Setting Mirror Mirror Mode
Mode (setting)
Power control of System
PRIMEQUEST Power
system Control
Setting forced Force Power
power-off Off Delay
Power-on/off Schedule
setting for each Control
partition
Possible values
Checked Checked:
(Turn off the When all partitions
power to the are shut down, the
cabinet and power to the cabinet
GSWB and GSWB is
synchronically.) synchronically turned
off.
Not checked:
Even when all
partitions are shut
down, the power to
the cabinet and
GSWB is kept on.
Altitude <= 15 • Altitude
00m
<= 1500m
• 1500m < Altitude
<= 2000m
• 2000m < Altitude
<= 2500m
• 2500m < Altitude
Enabled • Enable (Mirror
Mode)
• Disable (Non
Mirror Mode)
None • Power On - all
defined partition(s)
are powered on.
• Power On chassis
only (*)
• Power Off-The
chassis is powered
off after all
partition(s) are
shutdown.
• Force Power Off
No setting If forced power-off is
specified, time (1 to 9
minutes) can be
specified.
Off • On
• Off
E.1 Setting Items for MMB
Remarks
To change the
Mirror Mode
setting, the chassis
must be powered
off.
For this reason,
apply the above
setting to the system
before the chassis is
powered off.
No set value
* Only for the
PRIMEQUEST
580A/540A/580/
540/480/440.
The partition power
is forcibly turned
off if the specified
time has elapsed.
E-3