Table 2.23 Displayed And Setting Items In The [Partition Configuration] Window - Fujitsu PRIMEQUEST 500A Series Installation Manual

Table 2.23 Displayed and setting items in the [Partition Configuration] window

#
Partition Name
Status
Power Status
SB
IOU
IOX (PRIMEQUEST
520A/520/420 only)
2 Click the radio button of the number of the partition in which an SB, IO Unit, or
IOX is to be added.
3
Click the [Add SB/IOU] button.
The [Add SB/IOU to Partition] window is displayed with a list of available SBs,
IO Units, and IOX.
C122-E001-10EN
Item
Displays a partition identification number.
In the case of a PRIMEQUEST 580A/540A/580/540/480/440,
displays a partition number from 0 to 15. In the case of a
PRIMEQUEST 520A/520/420, displays a partition number from
0 to 3.
Displays and sets a name assigned to a partition. The name can
include up to 16 characters.
You can use the following characters:
0-9, a-z, A-Z, " " (en-size space), #, - (hyphen), _ (underscore)
Remarks:
Set the same name as Host Name to be set on the OS to make the
name easy to recognize.
Displays partition status.
• OK: Normal
• Degraded: Component error has occurred. (The failed
component can be disconnected to continue operation.)
• Failed: Failure has occurred.
• None: No partition configuration. Specifically, SBs and
IO Units are not allocated.
Displays partition power status.
• On: ON
• Standby: Standby
Displays
If the SB has been split into two portions, two columns are
displayed. The column in which no SB is mounted is grayed out.
Displays
the IO Unit has been split into two portions, two columns are
displayed.
If "H" is displayed, the IOU is the Home IOU. The column in
which no IOU is mounted is grayed out.
Displays
the IOX has been split into two portions, two columns are
displayed.
The column in which no IOX is mounted is grayed out.
Description
to indicate the partition to which the SB belongs.
to indicate the partition to which the IOU belongs. If
to indicate the partition to which the IOX belongs. If
2.5 Partition Initialization
2-53