Fujitsu PRIMEQUEST 500A Series Installation Manual page 266

CHAPTER 4 Work Required After Operating System Installation
4.5.6 PSA update installation
This section describes the PSA update installation procedure.
Remarks:For the procedure for obtaining fix programs, ask your Fujitsu certified
Note:
(1) Minor update installation
1
Save the fix program (fjpsaxxxx.exe) to the desired folder.
2
Start the fix program. The following installation preparation window opens.
3
When the following window is displayed to indicate that the system is ready for
installation, click the [Next] button to perform installation. Program updating is
started.
4-80
engineer or the support center.
If the PEXU has been mounted, use PSA-1.10 or later.
Figure 4.26 Installation preparation window
Figure 4.27 Update installation window
C122-E001-10EN