Fujitsu PRIMEQUEST 500A Series Installation Manual page 429

Appendix F Overall View of Management
A
The PRIMEQUEST management LAN uses the IP addresses shown in
Figure F.2.
PRIMEQUEST 580A/540A/580/540/480/440
IOU#0
BMM#0
IP =
192.168.1.1
MMB#0
For remote
maintenance
IP =
Dial-up router or
192.168.3.202
external switch
REMCS center
Figure F.1 Management LAN network configuration and IP addresses
The main applications of IP addresses are described below.
C122-E001-10EN
LAN IP Addresses
BMM#1
VIP =
192.168.1.102
IP =
192.168.1.100
REMCS VIP =
192.168.3.102
For management by the user
For local
maintenance
Maintenance terminal (FST)
IP =
192.168.1.200
(PRIMEQUEST 580A/540A/580/540/480/440)
IOU#7
BMM#0
IP =
192.168.1.8
MMB#1
IP =
192.168.1.101
For remote
maintenance
For local
maintenance
External switch
Notes:
1. The IP addresses in this figure are examples.
Web-UI
2. IP: Physical address
VIP: Virtual IP address
IP =
REMCS IP: IP address for remote maintenance.
192.168.1.201
3. Two subnets must be setup: One for management by
the user, the other for remote maintenance.
Specify the same subnet for management by the user
and for local maintenance.
4. BMM#1 is supported only in the
PRIMEQUEST 580A/540A/580/540.
Figure F.1
BMM#1
For management by the user
and
F-1