Figure 2.8 [Network Interface] Window (Primequest 520A/520/420) - Fujitsu PRIMEQUEST 500A Series Installation Manual

CHAPTER 2 Setup
Table 2.4 Displayed and setting items in the [Network Interface] window
Hostname
IP Address
Subnet Mask
Gateway Address
4
After setting all necessary items, click the [Apply] button.
Note: If an incorrect value is specified for the IP address or another required
2.2.3.2 Setting up the MMB network (PRIMEQUEST 520A/520/420)
Specify information including the IP address used to access the Web-UI.
Note that this information may have already been set by a Fujitsu certified service
engineer. If the information need not be changed, proceed with the next setting.
Remarks: When the IP address is changed, the connection to the MMB Web-UI is
Procedure
1
Click [Network Configuration]
The [Network Interface] window appears.

Figure 2.8 [Network Interface] window (PRIMEQUEST 520A/520/420)

2-18
Item
Specify the host name.
Specify the IP address.
Specify the subnet mask.
Specify the gateway IP address.
parameter, the MMB Web-UI is not displayed. Connect a general-
purpose PC to the COM port of the MMB, and specify the correct values.
For details on how to set the parameters, see
Procedure."
terminated. To use the MMB Web-UI, log in again.
Description
Appendix B, "Installation
→
[Network Interface].
C122-E001-10EN