Fujitsu PRIMEQUEST 500A Series Installation Manual page 48

CHAPTER 2 Setup
(3) GSWB setup (only for PRIMEQUEST 580A/540A/580/540/480/440)
(refer to the PRIMEQUEST GSWB User's Manual (C122-E028EN))
GSWBs can perform basic functions with as-shipped settings. Basic functions
referred to here mean functions that do not use a GSWB VLAN. The PRIMEQUEST
GSWB User's Manual (C122-E028EN) explains the settings to be made during
installation. These settings are not required unless you plan to use GSWB. To make
these settings, you must determine the following in advance:
• Host name, host IP address, subnet mask, default gateway
• Port to be enabled
Remarks: These settings are required for each GSWB that is used.
2-2 C122-E001-10EN