Fujitsu PRIMEQUEST 500A Series Installation Manual page 285

4.7 PSA Settings
For details on PSA settings on a system with Windows Server 2008 installed, see the
PRIMEQUEST Windows Server 2008 User's Guide (C122-E087EN).
4.8 PSA Monitoring Setup
PSA is a system management application program that runs on an OS of the
PRIMEQUEST machine to monitor for failures in the hardware and maintain the
configuration. This section describes items you need to set up in the PSA window
during installation.
Setting S.M.A.R.T.
Setting Watchdog
For saving the settings that have been made, see
information."
4.8.1 Setting S.M.A.R.T.
Setting Targets of S.M.A.R.T.
The Self-Monitoring, Analysis and Reporting Technology (S.M.A.R.T.) function for
predictive monitoring can be set for hard disks. This section explains how to enable
or disable S.M.A.R.T. for predictive detection of hard disks that support S.M.A.R.T.
S.M.A.R.T. applies to the entire group of hard disks.
S.M.A.R.T. monitors the following disks:
• Built-in disks (excluding those which do not support S.M.A.R.T.)
• External disks (excluding RAID units and those which do not support
S.M.A.R.T.)
Remarks:Only a user with setting authority can set or change the monitoring method.
C122-E001-10EN
(→ 4.8.1)
(→ 4.8.2)
A user without setting authority can only reference it.
Section 4.13.1, "Saving PSA setup
4.7 PSA Settings
4-99