Fujitsu PRIMEQUEST 500A Series Installation Manual page 235

* This example is an SUSE9 window. The displayed contents may vary
depending on the version of the OS.
* In the example, the second choice (Fujitsu Ethernet controller) matches the
last part of the name recorded in step 1.
5
Go to the [Network Address Setup] window to set up the network card.
Confirm that the value of [Configuration Name] includes the hardware address
that was checked in (1), "Checking the settings for the NIC of the management
LAN." Check [Static address setup], and specify the IP address and the subnet
mask.
Note: The specified IP address and the IP address of the MMB must have the
6
Quit YaST.
C122-E001-10EN
4.4 PSA Installation (Linux: SUSE) (PRIMEQUEST 500A/500/400 series common)
Figure 4.7 YaST window
same subnet mask.
4-49