Fujitsu PRIMEQUEST 500A Series Installation Manual page 351

5.1.3 Specifying SSH parameters
Specify SSH parameters for MMBs. This can be performed by users with
administrator privilege.
Procedure
1
Click [Network Configuration]
The [Network Protocols] window is displayed.
2 Specify the items related to SSH.
<SSH>
SSH
SSH Port
Timeout
3
Click the [Apply] button.
C122-E001-10EN
Figure 5.7 [Network Protocols] window (example)
Table 5.7 Setting items of SSH
Item
Sets [Enable]/[Disable] of SSH
Sets a port to be used for SSH.
Sets a time interval allotted for entering data with SSH
connected before the connection is cut off.
→
[Network Protocols].
Description
5.1 Security Settings
Default: [Disable]
Default: 22
Default: 600 seconds
5-13