Fujitsu PRIMEQUEST 500A Series Installation Manual page 90

CHAPTER 2 Setup
Shut down the target partition.
* Only if the partition is active.
PRIMEQUEST 500A/500 series only
Split/merge SBs, IO Unit, and IOXs.
Adding an SBs, IO Units, and IOX into the
partition.
• Add a free SB, IO Unit, and IOX.
• Release the reserved SB (→ 2.5.6) and add it.
• Remove the SB, IO Unit, and IOX from an existing partition (→ 2.5.4.2)
and add them to the target partition.
Set the Home IOU.
Set a reserved SB as needed.
Setting the partition name.
Setting various modes.
Reboot the partition.
2-44 C122-E001-10EN